Research on ultrasonic bone cutting mechanism based on extended finite element method
Biomechanics and Modeling in Mechanobiology · 2024-06 · 23 (3) · 861-877
DOI: 10.1007/s10237-023-01810-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, online erschienen am 23.01.2024. Verfasst von Linwei Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Automation, Northeastern University, Shenyang, 110819, China. Hauptthemen laut MEDLINE: Finite Element Analysis, Bone and Bones. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Liaoning Province, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
The research on the crack propagation mechanism of bone has important research significance and clinical medical value for the selection of cutting parameters and the development of new surgical tools. In this paper, an extended finite element method (X-FEM) model of ultrasonic bone cutting considering microstructure was developed to further study the ultrasonic bone cutting mechanism and to quantitatively analyze the effects of cutting direction, ultrasonic parameters, and cutting parameters on the mechanism of ultrasonic bone cutting crack propagation. The results show that ultrasonic bone cutting is essentially a controlled crack propagation process, in which brittle crack and fatigue crack are the main crack propagation mechanisms. In order to improve the efficiency of ultrasonic bone cutting, large amplitude and high-frequency ultrasonic vibration are preferred. Compared with the other two cutting directions, the crack propagation deflection angle in the transverse cutting direction is the largest, resulting in the worst cutting surface. Therefore, in the path planning of orthopedic surgical robots, the transverse cutting direction should be avoided as much as possible. Frequency only has a significant effect on the crack propagation rate and has a positive correlation. There is a positive correlation between the deflection angle, propagation length, propagation rate, and amplitude, which provides the possibility to control the direction and length of crack propagation by controlling the amplitude of ultrasonic. The feed speed is much lower than the ultrasonic vibration speed, which makes the influence of ultrasonic vibration speed on the crack propagation characteristics dominant. The X-FEM model of ultrasonic bone cutting provides an effective method for selecting reasonable machining parameters of orthopedic robot and optimize the design of ultrasonic osteotome.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering and Automation, Northeastern University, Shenyang, 110819, China.
- School of Mechanical Engineering and Automation, Northeastern University, Shenyang, 110819, China. yuliu@me.neu.edu.cn.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Liaoning Province
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Wang, L., Liu, Y., Wang, S., Li, J., Sun, Y., Wang, J., & Zou, Q. (2024). Research on ultrasonic bone cutting mechanism based on extended finite element method. Biomechanics and Modeling in Mechanobiology, 23(3), 861-877. https://doi.org/10.1007/s10237-023-01810-6
Vancouver
Wang L, Liu Y, Wang S, Li J, Sun Y, Wang J, et al. Research on ultrasonic bone cutting mechanism based on extended finite element method. Biomechanics and Modeling in Mechanobiology. 2024;23(3):861-877. doi:10.1007/s10237-023-01810-6
BibTeX
@article{Wang2024,
author = {Wang, Linwei and Liu, Yu and Wang, Shiwei and Li, Jinguang and Sun, Yumeng and Wang, Jingyu and Zou, Qilei},
title = {Research on ultrasonic bone cutting mechanism based on extended finite element method},
journal = {Biomechanics and Modeling in Mechanobiology},
year = {2024},
volume = {23},
number = {3},
pages = {861--877},
doi = {10.1007/s10237-023-01810-6}
}
EUVIMED