Computational comparison study of virtual compression and shear test for estimation of apparent elastic moduli under various boundary conditions
International Journal for Numerical Methods in Biomedical Engineering · 2024
DOI: 10.1002/cnm.3845 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, 2024. Verfasst von Jisun Kim und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Keimyung University, Daegu, Republic of Korea. Hauptthemen laut MEDLINE: Finite Element Analysis, Elastic Modulus. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: National Research Foundation of Korea (NRF).
Abstract (Originalsprache)
Virtual compression tests based on finite element analysis are representative noninvasive methods to evaluate bone strength. However, owing to the characteristic porous structure of bones, the material obtained from micro‐computed tomography images in the finite‐element model is not uniformly distributed. These characteristics cause differences in the apparent elastic moduli depending on the boundary conditions and affect the accuracy of bone‐strength evaluation. Therefore, this study aimed to evaluate and compare the apparent elastic moduli under various, virtual‐compression and shear‐test boundary conditions. Four, nonuniform models were constructed with increasing model complexity. For representative boundary conditions, two, different, testing directions, and constrained surfaces were applied. As a result, the apparent elastic moduli of the nonuniform model varied up to 55.2% based on where the constrained surface was located in the single‐end‐cemented condition. Additionally, when connectivity in the test direction was lost, the accuracy of the apparent elastic moduli was low. A graphical comparison showed that the equivalent‐stress distribution was more advantageous for analyzing load transferability and physical behavior than the strain‐energy distribution. These results clearly show that the prediction accuracy of the apparent elastic moduli can be guaranteed if the boundary condition on the constraint and loading surfaces of the nonuniform model are applied symmetrically and the connectivity of the elements in the testing direction is well maintained. This study will aid in precision improvement of bone‐strength‐indicator determination for osteoporosis prevention.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Keimyung University, Daegu, Republic of Korea.
ORCID-Profile: Jisun Kim, Jung Jin Kim
Förderung
- National Research Foundation of Korea (NRF)
Zitieren
APA
Kim, J., & Kim, J. J. (2024). Computational comparison study of virtual compression and shear test for estimation of apparent elastic moduli under various boundary conditions. International Journal for Numerical Methods in Biomedical Engineering. https://doi.org/10.1002/cnm.3845
Vancouver
Kim J, Kim JJ. Computational comparison study of virtual compression and shear test for estimation of apparent elastic moduli under various boundary conditions. International Journal for Numerical Methods in Biomedical Engineering. 2024. doi:10.1002/cnm.3845
BibTeX
@article{Kim2024,
author = {Kim, Jisun and Kim, Jung Jin},
title = {Computational comparison study of virtual compression and shear test for estimation of apparent elastic moduli under various boundary conditions},
journal = {International Journal for Numerical Methods in Biomedical Engineering},
year = {2024},
doi = {10.1002/cnm.3845}
}
EUVIMED