EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The impact of various surface treatments and Er-YAG laser irradiation on the bond strength of resin matrix CAD/CAM ceramics to resin cement

İlknur Usta Kutlu, Kaan Yerliyurt

Lasers in Medical Science · 2025

DOI: 10.1007/s10103-025-04460-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lasers in Medical Science, 2025. Verfasst von İlknur Usta Kutlu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Gaziosmanpaşa University, Tokat, Turkey. dt.kutlusta_i@hotmail.com. Hauptthemen laut MEDLINE: Lasers, Solid-State, Resin Cements, Ceramics, Computer-Aided Design. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The aim of the study was to assess the impact of various surface treatments, including an Er: YAG laser with different power outputs, on the shear bond strength (SBS) of different resin matrix CAD/CAM ceramic materials to resin luting cement. Materials and methods Specimens from Lava Ultimate (LU) and Vita Enamic (VE) were categorized based on the surface treatment: no treatment, sandblasting (Sb), 10% hydrofluoric acid (Ac) etching, sandblasting followed by acid etching (Sb + Ac), and Er: YAG laser irradiation at 2 W and 3 W (L1, L2). Scanning electron microscopy (SEM) evaluation and roughness measurement of the samples were performed. Silane was applied to half of the specimens, resin cement was bonded and SBS testing was performed.

Results

The SBS did not differ depending on the material ( P = 0.081), but varied according to the surface treatment ( P < 0.001). The highest mean SBS value was observed in the Sb + Ac (15.20) group. The highest roughness median was in Sb of VE, which was similar to Sb + Ac and Sb of all materials.

Conclusion

Applying Sb and Ac together was more effective than applying them separately. Although 2 W and 3 W Er-YAG applications were ineffective for treating VE’s surface, 2 W Er-YAG applications can be suggested for LU. Clinical Relevance The combined application of Sb and Ac is more effective than their individual applications and laser irradiation in terms of resin matrix CAD/CAM ceramics retention.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Lasers, Solid-StateResin CementsCeramicsComputer-Aided DesignDental BondingSurface PropertiesMaterials TestingShear StrengthMicroscopy, Electron, ScanningHumans

Stichwörter der Autor:innen

Er-YAG laserPolymer infiltrated ceramicResin matrix ceramicResin nanoceramicShear bond strength

Substanzen

Resin CementsVITA Enamic

Autor:innen und Institutionen

  • Gaziosmanpaşa University, Tokat, Turkey. dt.kutlusta_i@hotmail.com.
  • Gaziosmanpaşa University, Tokat, Turkey.

Zitieren

APA

Usta Kutlu, İ., & Yerliyurt, K. (2025). The impact of various surface treatments and Er-YAG laser irradiation on the bond strength of resin matrix CAD/CAM ceramics to resin cement. Lasers in Medical Science. https://doi.org/10.1007/s10103-025-04460-5

Vancouver

Usta Kutlu İ, Yerliyurt K. The impact of various surface treatments and Er-YAG laser irradiation on the bond strength of resin matrix CAD/CAM ceramics to resin cement. Lasers in Medical Science. 2025. doi:10.1007/s10103-025-04460-5

BibTeX
@article{UstaKutlu2025,
  author = {Usta Kutlu, İlknur and Yerliyurt, Kaan},
  title = {The impact of various surface treatments and Er-YAG laser irradiation on the bond strength of resin matrix CAD/CAM ceramics to resin cement},
  journal = {Lasers in Medical Science},
  year = {2025},
  doi = {10.1007/s10103-025-04460-5}
}
Kostenlos starten →