EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application and assessment of grouted-in pressure transducers to determine long-term in situ hydrogeologic properties of argillaceous aquitards

Laura A Smith iD

Hydrogeology Journal · 2026-11 · 34 (7) · 2153-2169

DOI: 10.1007/s10040-026-03091-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Hydrogeology Journal, online erschienen am 27.05.2026. Verfasst von Laura A Smith. Beteiligte Einrichtung: Department of Civil, Geological, and Environmental Engineering, University of Saskatchewan, Saskatoon, SK Canada. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Characterizing the in situ hydrogeologic properties of aquitards is difficult due to their low hydraulic conductivity ( K ) and slow response times. Consequently, numerical models often rely on laboratory determined values for geotechnical and hydrogeological parameters, which may be unreliable due to sample disturbance. This study shows that fully grouted, vibrating wire pressure transducers (VWPs) can be used to estimate the in situ compressibility ( α ), specific storage ( S S ), and in situ horizontal hydraulic conductivity ( K h ) of overconsolidated aquitards by analyzing pore pressure responses to barometric pressure fluctuations and post-installation recovery. While these methods have been used in shallow or short-term studies, their application in deeper, low- K formations with long-term monitoring remains limited. This study presents results from 34 VWPs installed across five boreholes at a single site (site 2) and compares them with previously published data from a similar site (site 1) in the Williston Basin (WB) where the methods were first developed and tested. The dataset provides a rare, high-resolution record of pore pressure behavior in glacial till and Cretaceous shale over monitoring periods of up to 16 years. The findings demonstrate the reproducibility of the methods across different lithologies and support their use in estimating representative hydraulic parameters for regional-scale models. This work adds to the growing body of research supporting in situ methods for aquitard characterization and highlights the value of long-term monitoring in improving the understanding of low- K systems in sedimentary basins.

Schlagwörter

Stichwörter der Autor:innen

AquitardFully grouted methodGroundwater monitoringHydraulic propertiesNumerical modeling

Autor:innen und Institutionen

  • Department of Civil, Geological, and Environmental Engineering, University of Saskatchewan, Saskatoon, SK Canada.

ORCID-Profile: Laura A Smith

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Smith, L. A. (2026). Application and assessment of grouted-in pressure transducers to determine long-term in situ hydrogeologic properties of argillaceous aquitards. Hydrogeology Journal, 34(7), 2153-2169. https://doi.org/10.1007/s10040-026-03091-6

Vancouver

Smith LA. Application and assessment of grouted-in pressure transducers to determine long-term in situ hydrogeologic properties of argillaceous aquitards. Hydrogeology Journal. 2026;34(7):2153-2169. doi:10.1007/s10040-026-03091-6

BibTeX
@article{Smith2026,
  author = {Smith, Laura A},
  title = {Application and assessment of grouted-in pressure transducers to determine long-term in situ hydrogeologic properties of argillaceous aquitards},
  journal = {Hydrogeology Journal},
  year = {2026},
  volume = {34},
  number = {7},
  pages = {2153--2169},
  doi = {10.1007/s10040-026-03091-6}
}
Kostenlos starten →