Mesh quality comparison of common three file formats derived from intraoral scans
Clinical Oral Investigations · 2026
DOI: 10.1007/s00784-026-06946-0 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift Clinical Oral Investigations, 2026. Verfasst von Mahmoud E Elbashti und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Advanced Prosthodontics, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, 1-5-45, Yushima, Bunkyo-ku, Tokyo,…. Hauptthemen laut MEDLINE: Software, Image Processing, Computer-Assisted, Imaging, Three-Dimensional, Mandible. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Purpose
To comparatively evaluate mesh quality metrics in PLY, STL, and OBJ files derived from native intraoral scans and exported using different mesh processing software, with emphasis on computational performance, geometric fidelity, and mesh resolution.
Methods
Fifty maxillary and mandibular full-arch intraoral scan datasets were acquired using a Trios 4 intraoral scanner under clinical conditions. Native datasets were exported directly in PLY format without decimation, smoothing, or mesh optimization and designated as reference files. Each reference dataset was converted into PLY, STL, and OBJ formats using four mesh processing software packages (Meshmixer, Blender, MeshLab, and CloudCompare) under default export settings without mesh-altering procedures. Quantitative mesh evaluation was performed in MeshLab, including computational performance (loading time, export time, and file size), geometric accuracy (bounding box dimensions and surface area), and mesh resolution (total edge count and average edge length). Statistical analyses were conducted to compare differences among file formats and software platforms.
Results
Computational performance differed significantly across file formats ( p < 0.001). Native PLY files demonstrated the fastest loading (median 293 MS) and export times (median 627 MS), whereas OBJ files exhibited the longest export durations (median 51,639 MS) and largest file sizes. STL files showed intermediate performance. In contrast, bounding box dimensions and surface area measurements showed no significant differences between reference and converted files ( p = 1.000), indicating preservation of scale and anatomical coverage. Edge-based metrics also revealed no significant differences in total edge count or average edge length ( p = 1.000), confirming maintenance of mesh resolution and tessellation density.
Conclusion
File format significantly influences computational efficiency but does not affect geometric accuracy or mesh resolution when default export parameters are applied. PLY format demonstrated superior workflow performance while maintaining equivalent geometric and topological integrity across software platforms. Clinical significance Under the specific conditions of this study, PLY, STL, and OBJ formats preserved global geometric properties during conversion, while PLY demonstrated superior computational efficiency and smaller file size. Within these constraints, the PLY format may be considered a preferred export option for intraoral scan data, as it can help streamline digital workflows in prosthodontics, orthodontics, and restorative dentistry, reducing technical bottlenecks and improving efficiency. However, clinicians and dental technicians may still exchange PLY, STL, and OBJ formats without concern for scaling distortion, and caution is warranted when generalizing these findings to other systems, non-default settings, or workflows involving mesh modification.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Advanced Prosthodontics, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, 1-5-45, Yushima, Bunkyo-ku, Tokyo, 113-8549, Japan. ellarousi@gmail.com.
- Department of Reconstructive Dentistry and Gerodontology, School of Dental Medicine, University of Bern, Bern, Switzerland.
- Department of Prosthodontics, Geriatric Dentistry and Craniomandibular Disorders, Corporate Member of Freie Universität Berlin and Humboldt-Universität zu Berlin, Charité- Universitätsmedizin Berlin, Berlin, Germany.
- Department of Dental Clinical Specialties, Faculty of Dentistry, Complutense University of Madrid, Madrid, Spain.
- Unit for Practice-based Research, School of Dental Medicine, University of Bern, Bern, Switzerland.
- Department of Prosthetic Dentistry, University Medical Center of the Johannes Gutenberg- University Mainz, Mainz, Germany.
Zitieren
APA
Elbashti, M. E., Çakmak, G., Paz-Cortes, M. M., Al-Haj Husain, N., Abou-Ayash, S., Roccuzzo, A., & Molinero-Mourelle, P. (2026). Mesh quality comparison of common three file formats derived from intraoral scans. Clinical Oral Investigations. https://doi.org/10.1007/s00784-026-06946-0
Vancouver
Elbashti ME, Çakmak G, Paz-Cortes MM, Al-Haj Husain N, Abou-Ayash S, Roccuzzo A, et al. Mesh quality comparison of common three file formats derived from intraoral scans. Clinical Oral Investigations. 2026. doi:10.1007/s00784-026-06946-0
BibTeX
@article{Elbashti2026,
author = {Elbashti, Mahmoud E and Çakmak, Gülce and Paz-Cortes, Marta Macarena and Al-Haj Husain, Nadin and Abou-Ayash, Samir and Roccuzzo, Andrea and Molinero-Mourelle, Pedro},
title = {Mesh quality comparison of common three file formats derived from intraoral scans},
journal = {Clinical Oral Investigations},
year = {2026},
doi = {10.1007/s00784-026-06946-0}
}
EUVIMED