EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance of posterior 3D printed resin-matrix ceramic crowns fabricated in a fully digital workflow: a two-year prospective clinical study

Marina Del Piñal Pellón, Celia Tobar, Pedro Díaz, Jesus Pelaez, Maria J Suarez

Clinical Oral Investigations · 21.04.2026 · 30 (5)

DOI: 10.1007/s00784-026-06883-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 21.04.2026. Verfasst von Marina Del Piñal Pellón und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Conservative Dentistry and Prosthodontics, Faculty of Odontology, University Complutense of Madrid, Madrid, Spain. Hauptthemen laut MEDLINE: Crowns, Printing, Three-Dimensional, Dental Prosthesis Design, Ceramics. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Complutense de Madrid.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To evaluate the survival and success rates, as well as mechanical and biological outcomes of posterior 3D-printed resin-matrix ceramic crowns in a fully digital workflow over a 2-year follow-up. Material and methods A prospective clinical trial was conducting involving 30 posterior crowns fabricated from a resin-matrix ceramic using DLP 3D-printing technology. Dental preparations were performed and scanned with an intraoral scanner by a single operator. All crowns were cemented using the same dual-curing resin cement. Clinical performance was assessed using California Dental Association (CDA) criteria. Periodontal parameters (plaque index, gingival index and probing depth) were evaluated with a periodontal probe at cementation and at 6-month, 1-year, and 2-year recall appointments on abutment teeth and contralateral or antagonistic uncrowned natural teeth used as controls. Data were analyzed using Wilcoxon signed rank test and Kaplan–Meier survival analysis.

Results

The 2-year survival rate was 93%, and the success rate was 87%. Two crowns debonded, and no biological complications were observed. All crowns remained within the satisfactory range after 2 years. A slight yellow shift was detected in 4 crowns, resulting in a significant color change at 2 years ( p = 0.046), while all other CDA parameters remained unchanged. The margin remained stable throughout the observation period. Plaque index increased after one year in the abutment and control teeth.

Conclusions

Within the limitations of this study, including the absence of a control group, 3D-printed resin-matrix ceramic crowns may represent a viable alternative for posterior teeth. Long-term studies are required to confirm these results. Clinical relevance Posterior 3D-printed resin–matrix ceramic crowns within a fully digital workflow demonstrated satisfactory performance after two years, supporting their potential as a viable option for posterior restorations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CrownsPrinting, Three-DimensionalDental Prosthesis DesignCeramicsHumansProspective StudiesWorkflowComputer-Aided DesignDental Restoration Failure

Stichwörter der Autor:innen

3D-printingClinical evaluationCrownsResin-matrix ceramicSurvival

Autor:innen und Institutionen

  • Department of Conservative Dentistry and Prosthodontics, Faculty of Odontology, University Complutense of Madrid, Madrid, Spain.
  • Department of Conservative Dentistry and Prosthodontics, Faculty of Odontology, University Complutense of Madrid, Madrid, Spain. jpelaezr@ucm.es.

Förderung

  • Universidad Complutense de Madrid

Zitieren

APA

Del Piñal Pellón, M., Tobar, C., Díaz, P., Pelaez, J., & Suarez, M. J. (2026). Performance of posterior 3D printed resin-matrix ceramic crowns fabricated in a fully digital workflow: a two-year prospective clinical study. Clinical Oral Investigations, 30(5). https://doi.org/10.1007/s00784-026-06883-y

Vancouver

Del Piñal Pellón M, Tobar C, Díaz P, Pelaez J, Suarez MJ. Performance of posterior 3D printed resin-matrix ceramic crowns fabricated in a fully digital workflow: a two-year prospective clinical study. Clinical Oral Investigations. 2026;30(5). doi:10.1007/s00784-026-06883-y

BibTeX
@article{DelPialPelln2026,
  author = {Del Piñal Pellón, Marina and Tobar, Celia and Díaz, Pedro and Pelaez, Jesus and Suarez, Maria J},
  title = {Performance of posterior 3D printed resin-matrix ceramic crowns fabricated in a fully digital workflow: a two-year prospective clinical study},
  journal = {Clinical Oral Investigations},
  year = {2026},
  volume = {30},
  number = {5},
  doi = {10.1007/s00784-026-06883-y}
}
Kostenlos starten →