EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of post-processing on the surface, optical, mechanical, and dimensional properties of 3D-printed orthodontic clear retainers

Siew Peng Neoh, Anak Khantachawana, Peerapong Santiwong, Rochaya Chintavalakorn, Toemsak Srikhirin

Clinical Oral Investigations · 06.01.2025 · 29 (1)

DOI: 10.1007/s00784-024-06120-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 06.01.2025. Verfasst von Siew Peng Neoh und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, Faculty of Dentistry, Mahidol University, 6 Yothi Alley, Phayathai, Bangkok, 10400, Thailand. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Surface Properties, Materials Testing, Orthodontic Retainers. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mahidol University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To address the high surface roughness and poor optical properties of three-dimensional (3D) printed orthodontic clear retainers, an alternative post-processing protocol was investigated with the goal of achieving improved surface, optical, and mechanical properties while preserving dimensional accuracy. Materials and methods Samples were prepared from two biocompatible methacrylate-based 3D-printing resins (Formlabs Dental LT Clear V2, NextDent OrthoFlex) and one thermoplastic material (Duran). For the 3D-printed resins, one group was post-processed by rinsing in isopropyl alcohol, while another group was centrifuged before post-curing in glycerine. Three different testing conditions were used: dry, wet (24-h water immersion), and aged (thermocycling for 10,000 cycles). Surface characteristics were evaluated qualitatively and quantitatively. Optical properties were assessed for transparency and colour stability, while mechanical properties were elicited from tensile and microhardness tests. Water sorption and solubility were calculated. Samples mounted on a dental model were scanned by micro-computed tomography to measure thickness and gap width.

Results

3D-printed samples post-processed by centrifugation showed significantly decreased surface roughness and improved visible light transmission, colour stability, tensile strength, and hardness. The centrifuged samples showed significantly increased thickness, while designing an offset equal to this thickness improved the adaptation.

Conclusions

Post-processing by centrifugation produces surface coating that enhances the surface and optical properties of the 3D-printed orthodontic retainers, while curing in an oxygen-free environment improves their mechanical properties. Design modifications may be necessary for this protocol to ensure proper adaptation to the dentition. Clinical relevance Proper design and post-processing protocols are necessary to achieve the desired properties of orthodontic clear retainers.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalSurface PropertiesMaterials TestingOrthodontic RetainersOrthodontic Appliance DesignX-Ray MicrotomographyTensile StrengthHardness

Stichwörter der Autor:innen

3D printingCentrifugationClear retainersCoatingPost-processing

Autor:innen und Institutionen

  • Department of Orthodontics, Faculty of Dentistry, Mahidol University, 6 Yothi Alley, Phayathai, Bangkok, 10400, Thailand.
  • Department of Mechanical Engineering, Faculty of Engineering, King Mongkut's University of Technology Thonburi, 126 Pracha Uthit Road, Bang Mot, Thung Khru, Bangkok, 10140, Thailand.
  • Department of Orthodontics, Faculty of Dentistry, Mahidol University, 6 Yothi Alley, Phayathai, Bangkok, 10400, Thailand. krittika.chi@mahidol.ac.th.
  • School of Materials Science and Innovation, Faculty of Science, Mahidol University, Phuttamonthon 4 Road, Salaya, Phuttamonthon District, Nakhon Pathom, 73170, Thailand.

Förderung

  • Mahidol University

Zitieren

APA

Neoh, S. P., Khantachawana, A., Santiwong, P., Chintavalakorn, R., & Srikhirin, T. (2025). Effect of post-processing on the surface, optical, mechanical, and dimensional properties of 3D-printed orthodontic clear retainers. Clinical Oral Investigations, 29(1). https://doi.org/10.1007/s00784-024-06120-4

Vancouver

Neoh SP, Khantachawana A, Santiwong P, Chintavalakorn R, Srikhirin T. Effect of post-processing on the surface, optical, mechanical, and dimensional properties of 3D-printed orthodontic clear retainers. Clinical Oral Investigations. 2025;29(1). doi:10.1007/s00784-024-06120-4

BibTeX
@article{Neoh2025,
  author = {Neoh, Siew Peng and Khantachawana, Anak and Santiwong, Peerapong and Chintavalakorn, Rochaya and Srikhirin, Toemsak},
  title = {Effect of post-processing on the surface, optical, mechanical, and dimensional properties of 3D-printed orthodontic clear retainers},
  journal = {Clinical Oral Investigations},
  year = {2025},
  volume = {29},
  number = {1},
  doi = {10.1007/s00784-024-06120-4}
}
Kostenlos starten →