EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of polishing system on surface roughness of different ceramic surfaces after various pretreatments and bracket debonding

Rebecca Jungbauer, Anja Liebermann, Christian M Hammer, Daniel Edelhoff, Peter Proff, Bogna Stawarczyk

Clinical Oral Investigations · 11.05.2023 · 27 (8) · 4389-4399

DOI: 10.1007/s00784-023-05058-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 11.05.2023. Verfasst von Rebecca Jungbauer und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, University Medical Centre Regensburg, Franz-Josef-Strauß-Allee 11, 93053, Regensburg, Germany. rebecca.jungbauer@ukr.de. Hauptthemen laut MEDLINE: Zirconium, Ceramics. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitätsklinikum Regensburg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

Evaluating various polishing methods after bracket debonding and excessive attachment material removal for different ceramics and pretreatments. Material and methods Zirconia (ZrO2), leucite (LEU) and lithium disilicate (LiSi) specimens were pretreated with a) silica coated alumina particles (CoJet); LEU and LiSi additionally with b) hydrofluoric acid (HF), c) Monobond Etch&Prime (MEP), d) silicium carbide grinder (SiC) before bracket bonding, shearing off, ARI evaluation, excessive attachment material removal and polishing with i) Sof-Lex Discs (Soflex), ii) polishing paste (Paste), iii) polishing set (Set). Before/after polishing surface roughness (Ra) was measured with a profilometer. Martens hardness parameter were also assessed.

Results

Irrespective of pretreatment Ra of LEU increased the most, followed by LiSi and ZrO2 ( p < 0.001, SiC: p = 0.012), in accordance with the measured Martens hardness parameter. CoJet/SiC caused greater roughness as HF/MEP ( p < 0.001). The ZrO2 surface was rougher after polishing with Paste/Set ( p < 0.001; p = 0.047). Ra improved in the LEU/CoJet, LEU/SiC and LiSi/SiC groups with Soflex/Set ( p < 0.001), in the LiSi/CoJet and LEU/HF groups by Soflex ( p = 0.003, p < 0.001) and worsened by Paste ( p = 0.017, p < 0.001). Polishing of HF or MEP pretreated LiSi with Set increased Ra ( p = 0.001, p < 0.001), so did Paste in the LEU/MEP group ( p < 0.001).

Conclusions

Paste couldn’t improve the surfaces. Soflex was the only method decreasing Ra on rough surfaces and not causing roughness worsening. Polishing of LEU/LiSi after MEP, LEU after HF pretreatment doesn´t seem to have any benefit. Clinical Relevance To avoid long-term damage to ceramic restorations, special attention should be paid to the polishing method after orthodontic treatment.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ZirconiumCeramicsMaterials TestingDental PorcelainSurface PropertiesDental PolishingAluminum Silicates

Stichwörter der Autor:innen

Bracket debondingCeramicsPolishingPretreatmentSurface roughness

Substanzen

ZirconiumDental Porcelainzirconium oxideleuciteAluminum Silicates

Autor:innen und Institutionen

  • Department of Orthodontics, University Medical Centre Regensburg, Franz-Josef-Strauß-Allee 11, 93053, Regensburg, Germany. rebecca.jungbauer@ukr.de.
  • Department of Prosthetic Dentistry, University Hospital, LMU Munich, Munich, Germany. rebecca.jungbauer@ukr.de.
  • Department of Prosthetic Dentistry, Faculty of Medicine and University Hospital Cologne, University of Cologne, Cologne, Germany.
  • Institute of Functional and Clinical Anatomy, Friedrich Alexander University Erlangen-Nürnberg, Erlangen, Germany.
  • Faculty of Science and Medicine, University of Fribourg, Anatomy Unit, Fribourg, Switzerland.
  • Department of Prosthetic Dentistry, University Hospital, LMU Munich, Munich, Germany.

Förderung

  • Universitätsklinikum Regensburg

Zitieren

APA

Jungbauer, R., Liebermann, A., Hammer, C. M., Edelhoff, D., Proff, P., & Stawarczyk, B. (2023). Impact of polishing system on surface roughness of different ceramic surfaces after various pretreatments and bracket debonding. Clinical Oral Investigations, 27(8), 4389-4399. https://doi.org/10.1007/s00784-023-05058-3

Vancouver

Jungbauer R, Liebermann A, Hammer CM, Edelhoff D, Proff P, Stawarczyk B. Impact of polishing system on surface roughness of different ceramic surfaces after various pretreatments and bracket debonding. Clinical Oral Investigations. 2023;27(8):4389-4399. doi:10.1007/s00784-023-05058-3

BibTeX
@article{Jungbauer2023,
  author = {Jungbauer, Rebecca and Liebermann, Anja and Hammer, Christian M and Edelhoff, Daniel and Proff, Peter and Stawarczyk, Bogna},
  title = {Impact of polishing system on surface roughness of different ceramic surfaces after various pretreatments and bracket debonding},
  journal = {Clinical Oral Investigations},
  year = {2023},
  volume = {27},
  number = {8},
  pages = {4389--4399},
  doi = {10.1007/s00784-023-05058-3}
}
Kostenlos starten →