Effects of synthetic diamond abrasives on the surface quality of CAD-CAM restorative materials
The Journal of Prosthetic Dentistry · 2026
DOI: 10.1016/j.prosdent.2026.05.034 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2026. Verfasst von Şafak Külünk und 3 weiteren Autor:innen. Beteiligte Einrichtung: Professor, Department of Prosthodontics, Faculty of Dentistry, Ondokuz Mayıs University, Samsun, Turkey. Hauptthemen laut MEDLINE: Computer-Aided Design, Diamond, Dental Polishing, Dental Materials. Die Arbeit nennt 29 Literaturangaben.
Abstract (Originalsprache)
STATEMENT OF PROBLEM: Finishing and polishing protocols can markedly influence the surface quality of computer-aided design-computer-aided manufacturing (CAD-CAM) restorative materials; however, the performance of synthetic diamond abrasives across different microstructures remains unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effects of various finishing and polishing procedures on the surface roughness, gloss, and contact angle of 4 CAD-CAM restorative materials. MATERIAL AND METHODS: Eighty rectangular specimens (15×1.5×1.5 mm) were prepared from a polymer-infiltrated ceramic (Enamic), ceramic-reinforced composite resin (Cerasmart), fiber-reinforced composite resin (Trinia), and feldspathic ceramic (Vita Mark II). After standardized grinding with 600-, 800-, and 1000-grit silicon carbide papers, specimens were assigned to 4 groups (n=5): control (C), rubber-cup polishing (RC), rubber-cup polishing followed by diamond polishing paste (RC+DP), and rubber-cup polishing followed by synthetic diamond abrasives (RC+SD). Surface roughness (Ra), gloss, and contact angle were measured using a contact profilometer, glossmeter, and drop-shape analyzer, respectively. Data were analyzed using 2-way analysis of variance and the Tukey post hoc test (α=.05). RESULTS: Both polishing procedure and material type significantly affected surface roughness, gloss, and contact angle values (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Professor, Department of Prosthodontics, Faculty of Dentistry, Ondokuz Mayıs University, Samsun, Turkey.
- Assistant Professor, Department of Prosthodontics, Faculty of Dentistry, Muğla Sıtkı Koçman University, Muğla, Turkey. Electronic address: senihakisakurek@mu.edu.tr.
- Assistant Professor, Department of Prosthodontics, Faculty of Dentistry, İstanbul Aydın University, İstanbul, Turkey.
Zitieren
APA
Külünk, Ş., Kısakürek, S., Çetiner, R. B., & Külünk, T. (2026). Effects of synthetic diamond abrasives on the surface quality of CAD-CAM restorative materials. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2026.05.034
Vancouver
Külünk Ş, Kısakürek S, Çetiner RB, Külünk T. Effects of synthetic diamond abrasives on the surface quality of CAD-CAM restorative materials. The Journal of Prosthetic Dentistry. 2026. doi:10.1016/j.prosdent.2026.05.034
BibTeX
@article{Klnk2026,
author = {Külünk, Şafak and Kısakürek, Seniha and Çetiner, Reşat Batuhan and Külünk, Tolga},
title = {Effects of synthetic diamond abrasives on the surface quality of CAD-CAM restorative materials},
journal = {The Journal of Prosthetic Dentistry},
year = {2026},
doi = {10.1016/j.prosdent.2026.05.034}
}
EUVIMED