Evaluation of the accuracy of orthodontic models prototyped with entry-level LCD-based 3D printers: a study using surface-based superimposition and deviation analysis
Clinical Oral Investigations · 2022-01 · 26 (1) · 303-312
DOI: 10.1007/s00784-021-03999-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 07.06.2021. Verfasst von Antonino Lo Giudice und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthodontics, School of Dentistry, Unit of Orthodontics, University of Catania, Policlinico Universitario "Vittorio Emanuele, " Via San…. Hauptthemen laut MEDLINE: Liquid Crystals, Orthodontics. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 31 Literaturangaben.
Abstract (Originalsprache)
OBJECTIVES: The objective of this study was to evaluate the accuracy of dental models prototyped via entry-level liquid crystal display (LCD) 3D printers. MATERIALS AND METHODS: Identical prototyped models were generated from a master digital file testing two entry-level LCD-based 3D printers and using one professional-grade 3D printer as gold standard (GS), with 50-µm and 100-µm layer thickness. Each 3D-printed model was scanned, and a specific 3D technology was used to perform surface-based superimposition and deviation analysis to evaluate trueness and precision. The distances between surface points of two superimposed models were converted to root mean square (RMS) and statistically analyzed. RESULTS: The RMS values detected were significantly higher in dental models prototyped with entry-level compared to the SLA printer (p 0.05). Layer thickness did not affect either the trueness or precision of the 3D-printed models (p > 0.05). CONCLUSION: Entry-level LCD-based 3D printers are not as accurate as professional-grade 3D printer, but still close to orthodontics clinical threshold values. CLINICAL RELEVANCE: Clinicians should evaluate the intended application of 3D-printed orthodontic models before using entry-level 3D printers.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Orthodontics, School of Dentistry, Unit of Orthodontics, University of Catania, Policlinico Universitario "Vittorio Emanuele, " Via Santa Sofia 78 95123, Catania, Italy.
- Department of Orthodontics, School of Dentistry, Unit of Orthodontics, University of Catania, Policlinico Universitario "Vittorio Emanuele, " Via Santa Sofia 78 95123, Catania, Italy. lorenzo.rustico@gmail.com.
- Department of Orthodontics, School of Dentistry, Pharos University, Canal El Mahmoudia Street, Alexandria, Egypt.
Zitieren
APA
Lo Giudice, A., Ronsivalle, V., Rustico, L., Aboulazm, K., Isola, G., & Palazzo, G. (2022). Evaluation of the accuracy of orthodontic models prototyped with entry-level LCD-based 3D printers: a study using surface-based superimposition and deviation analysis. Clinical Oral Investigations, 26(1), 303-312. https://doi.org/10.1007/s00784-021-03999-1
Vancouver
Lo Giudice A, Ronsivalle V, Rustico L, Aboulazm K, Isola G, Palazzo G. Evaluation of the accuracy of orthodontic models prototyped with entry-level LCD-based 3D printers: a study using surface-based superimposition and deviation analysis. Clinical Oral Investigations. 2022;26(1):303-312. doi:10.1007/s00784-021-03999-1
BibTeX
@article{LoGiudice2022,
author = {Lo Giudice, Antonino and Ronsivalle, Vincenzo and Rustico, Lorenzo and Aboulazm, Kaled and Isola, Gaetano and Palazzo, Giuseppe},
title = {Evaluation of the accuracy of orthodontic models prototyped with entry-level LCD-based 3D printers: a study using surface-based superimposition and deviation analysis},
journal = {Clinical Oral Investigations},
year = {2022},
volume = {26},
number = {1},
pages = {303--312},
doi = {10.1007/s00784-021-03999-1}
}
EUVIMED