Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays
Microchimica Acta · 2024
DOI: 10.1007/s00604-024-06512-z ↗Kurz gefasst
Fachartikel in der Zeitschrift Microchimica Acta, 2024. Verfasst von Jakub Novotny und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Analytical Chemistry of the CAS, v. v. i., Veveri 967/97, 60200, Brno, Czech Republic. novotnyj@iach.cz. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Stereolithography. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund, Singing Plant, OP RDE, Strengthening interdisciplinary cooperation in research of nanomaterials and their effects on living organisms, Ústav analytické chemie, Akademie Věd České Republiky.
Abstract (Originalsprache)
In stereolithographic (SLA) 3D printing, objects are constructed by exposing layers of photocurable resin to UV light. It is a highly user-friendly fabrication method that opens a possibility for technology sharing through CAD file online libraries. Here, we present a prototyping procedure of a microfluidics-enhanced dot-blot device (Affiblot) designed for simple and inexpensive screening of affinity molecule characteristics (antibodies, oligonucleotides, cell receptors, etc.). The incorporation of microfluidic features makes sample processing user-friendly, less time-consuming, and less laborious, all performed completely on-device, distinguishing it from other dot-blot devices. Initially, the Affiblot device was fabricated using CNC machining, which required significant investment in manual post-processing and resulted in low reproducibility. Utilization of SLA 3D printing reduced the amount of manual post-processing, which significantly streamlined the prototyping process. Moreover, it enabled the fabrication of previously impossible features, including internal fluidic channels. While 3D printing of sub-millimeter microchannels usually requires custom-built printers, we were able to fabricate microfluidic features on a readily available commercial printer. Open microchannels in the size range 200–300 μm could be fabricated with reliable repeatability and sealed with a replaceable foil. Economic aspects of device fabrication are also discussed. Graphical abstract
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Analytical Chemistry of the CAS, v. v. i., Veveri 967/97, 60200, Brno, Czech Republic. novotnyj@iach.cz.
- Department of Biological and Medical Sciences, Faculty of Pharmacy in Hradec Kralove, Charles University, Pardubice, Czech Republic. svobozu@faf.cuni.cz.
- Department of Biological and Medical Sciences, Faculty of Pharmacy in Hradec Kralove, Charles University, Pardubice, Czech Republic.
- Department of Economy and Management of Chemical and Foodstuff Industry, Faculty of Chemical Technology, University of Pardubice, Pardubice, Czech Republic.
- Department of Biological and Biochemical Sciences, Faculty of Chemical Technology, University of Pardubice, Pardubice, Czech Republic.
- Institute of Analytical Chemistry of the CAS, v. v. i., Veveri 967/97, 60200, Brno, Czech Republic.
ORCID-Profile: Zuzana Svobodova, Jana Kostalova, Zuzana Bilkova, Frantisek Foret
Förderung
- European Regional Development Fund, Singing Plant
- OP RDE, Strengthening interdisciplinary cooperation in research of nanomaterials and their effects on living organisms
- Ústav analytické chemie, Akademie Věd České Republiky
- Univerzita Karlova, Cooperatio PharmSci
- Charles University
Zitieren
APA
Novotny, J., Svobodova, Z., Ilicova, M., Hruskova, D., Kostalova, J., Bilkova, Z., & Foret, F. (2024). Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays. Microchimica Acta. https://doi.org/10.1007/s00604-024-06512-z
Vancouver
Novotny J, Svobodova Z, Ilicova M, Hruskova D, Kostalova J, Bilkova Z, et al. Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays. Microchimica Acta. 2024. doi:10.1007/s00604-024-06512-z
BibTeX
@article{Novotny2024,
author = {Novotny, Jakub and Svobodova, Zuzana and Ilicova, Marie and Hruskova, Dominika and Kostalova, Jana and Bilkova, Zuzana and Foret, Frantisek},
title = {Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays},
journal = {Microchimica Acta},
year = {2024},
doi = {10.1007/s00604-024-06512-z}
}
EUVIMED