EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of the biological properties between 3D-printed and decellularized tracheal grafts

Yao Wang, Jianfeng Li, Jun Qian, Yunhao Sun, Jianning Xu, Jian Sun

Bioprocess and Biosystems Engineering · 2023

DOI: 10.1007/s00449-023-02867-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioprocess and Biosystems Engineering, 2023. Verfasst von Yao Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cardiothoracic Surgery, Yancheng First Hospital, Affiliated Hospital of Nanjing University Medical School, Yancheng, 224005, China. Hauptthemen laut MEDLINE: Tissue Scaffolds, Trachea. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Program of Medical Science and Technology in Yancheng, Medical Research Project of Jiangsu Commission of Health, Talent Support Project of Jiangsu Association for Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study sought to characterize the differences between the 3D-printed and decellularized tracheal grafts, providing the basis for the synthesis of the more reasonable and effective tissue-engineered trachea. We compared the biomechanical properties and biocompatibility of the 3D-printed tracheal graft and decellularized tracheal graft in vitro and evaluated the biocompatibility, immune rejection and inflammation of the two materials through in vivo implantation experiments. Compared with the decellularized tracheal graft, the 3D-printed tracheal graft was associated with obviously higher biomechanical properties. The results demonstrated enhanced growth of BMSCs in the decellularized tracheal graft compared to the 3D-printed one when co-culture with two tracheal graft groups. Moreover, the CCK-8 assay demonstrated significant cell proliferation on the decellularized tracheal graft. Serum IgG and IgM measured in vivo by implantation testing indicated that the 3D-Printed tracheal graft exhibited the most significant inflammatory response. HE staining indicated that the inflammatory response in the 3D-printed tracheal graft consisted mainly of eosinophils, while little inflammatory cell infiltrates were observed in the decellularized tracheal graft. CD68 immunohistochemical analysis indicated that the infiltration of macrophages was not significant in both tracheal grafts. Our findings suggest that the biomechanical properties of the 3D-printed tracheal grafts are better than the decellularized tracheal grafts. Nonetheless, the decellularized tracheal graft exhibited better biocompatibility than the 3D-printed tracheal graft.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsTracheaTissue EngineeringCoculture TechniquesPrinting, Three-Dimensional

Stichwörter der Autor:innen

3D-Printed tracheal graftBiocompatibilityBiomechanical propertyDecellularized tracheal graftTissue-engineered trachea

Autor:innen und Institutionen

  • Department of Cardiothoracic Surgery, Yancheng First Hospital, Affiliated Hospital of Nanjing University Medical School, Yancheng, 224005, China.
  • Yizheng Hospital, Drum Tower Hospital Group of Nanjing, Yizheng, 211900, China.
  • Department of Cardiothoracic Surgery, Yancheng First Hospital, Affiliated Hospital of Nanjing University Medical School, Yancheng, 224005, China. 15895191698@163.com.

Förderung

  • Program of Medical Science and Technology in Yancheng
  • Medical Research Project of Jiangsu Commission of Health
  • Talent Support Project of Jiangsu Association for Science and Technology

Zitieren

APA

Wang, Y., Li, J., Qian, J., Sun, Y., Xu, J., & Sun, J. (2023). Comparison of the biological properties between 3D-printed and decellularized tracheal grafts. Bioprocess and Biosystems Engineering. https://doi.org/10.1007/s00449-023-02867-4

Vancouver

Wang Y, Li J, Qian J, Sun Y, Xu J, Sun J. Comparison of the biological properties between 3D-printed and decellularized tracheal grafts. Bioprocess and Biosystems Engineering. 2023. doi:10.1007/s00449-023-02867-4

BibTeX
@article{Wang2023,
  author = {Wang, Yao and Li, Jianfeng and Qian, Jun and Sun, Yunhao and Xu, Jianning and Sun, Jian},
  title = {Comparison of the biological properties between 3D-printed and decellularized tracheal grafts},
  journal = {Bioprocess and Biosystems Engineering},
  year = {2023},
  doi = {10.1007/s00449-023-02867-4}
}
Kostenlos starten →