EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Suitability of X-ray densitometry for assessing density profiles in chemically modified wood

Christoph Hötte, Philipp Schlotzhauer, Susanne Bollmus, Holger Militz

Wood Science and Technology · 2027-01 · 61 (1)

DOI: 10.1007/s00226-026-01824-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Wood Science and Technology, online erschienen am 17.11.2026. Verfasst von Christoph Hötte und 3 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Georg-August-Universität Göttingen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

X-ray densitometry was evaluated for its suitability to characterize density profiles in chemically modified wood, using sorbitol–citric acid (SorCA)-modified Scots pine sapwood as a model material. Gravimetric layer-by-layer profiling served as the reference method. The influence of sample orientation on X-ray density profiles and the effect of density heterogeneity in more than one anatomical direction were investigated. In unmodified reference samples, the two methods gave comparable results. In modified samples, X-ray densitometry reliably captured the general shape of density profiles and appears suitable for assessing the spatial distribution of chemical loading across the cross-section. However, systematic deviations were observed: density was underestimated in high-density surface zones and overestimated in the low-density core zone. Expressed relative to the density increase due to modification, differences in the core zone were considerable. X-ray density profiles therefore do not allow direct conclusions on local chemical loading. An additional density gradient perpendicular to the profiling direction caused X-ray profiles to vary with sample orientation in the densitometer. Removing this gradient by additional sample preparation reduced this variation but did not improve agreement with the gravimetric reference; this preparation step is therefore not required.

Förderung

  • Georg-August-Universität Göttingen

Zitieren

APA

Hötte, C., Schlotzhauer, P., Bollmus, S., & Militz, H. (2027). Suitability of X-ray densitometry for assessing density profiles in chemically modified wood. Wood Science and Technology, 61(1). https://doi.org/10.1007/s00226-026-01824-0

Vancouver

Hötte C, Schlotzhauer P, Bollmus S, Militz H. Suitability of X-ray densitometry for assessing density profiles in chemically modified wood. Wood Science and Technology. 2027;61(1). doi:10.1007/s00226-026-01824-0

BibTeX
@article{Htte2027,
  author = {Hötte, Christoph and Schlotzhauer, Philipp and Bollmus, Susanne and Militz, Holger},
  title = {Suitability of X-ray densitometry for assessing density profiles in chemically modified wood},
  journal = {Wood Science and Technology},
  year = {2027},
  volume = {61},
  number = {1},
  doi = {10.1007/s00226-026-01824-0}
}
Kostenlos starten →