Adhesive penetration analysis in birch plywood using X-ray densitometry
European Journal of Wood and Wood Products · 2026-10 · 84 (5)
DOI: 10.1007/s00107-026-02474-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift European Journal of Wood and Wood Products, online erschienen am 26.08.2026. Verfasst von Ramesh Karri und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Eastern Finland.
Abstract (Originalsprache)
Non-destructive and rapid analysis of adhesive penetration in engineered wood products ensures bond integrity, enabling the development of novel adhesives and quality manufacturing. The present study evaluated the X-ray densitometry method for studying the adhesive penetration in birch plywood. In this approach, it was quantified as a function of distance by measuring the X-ray density profile section where the adhesive bond-line density was above the baseline wood density. Accordingly, untreated and esterified birch veneers were pressed into plywood using both liquid and solid-type phenolic adhesives, resulting in four types of five-layered plywood of 7-8 mm in thickness. Optimization of X-ray beam attenuation through the plywood was done by preliminary trials and identified the specimen dimensions as 50 mm in height and 25 mm in width using a scanning speed of 0.5 mm min $$^{-1}$$ . The X-ray densitometry measured densities of cured phenolic adhesive to be 1150 ± 50 kg m $$^{-3}$$ and esterification-modified birch plywood to be 750 ± 25 kg m $$^{-3}$$ . These density values are consistent with gravimetric density measurements. Density profile observations indicate that both liquid and solid forms of phenolic adhesives exhibited similar levels of adhesive penetration in plywood. X-ray densitometry analysis determined a total interphase thickness ranging from 0.50 to 0.75 mm, encompassing the central adhesive bond-line and the effective adhesive penetration into both adjacent veneers. These values are comparable with those measurements obtained from microscopy imaging analysis. Therefore, X-ray densitometry could be a swift method for quantifying adhesive penetration, although further studies are needed to validate its accuracy and reliability.
Förderung
- University of Eastern Finland
Zitieren
APA
Karri, R., Treu, A., Koski, A., Larnøy, E., & Koponen, S. (2026). Adhesive penetration analysis in birch plywood using X-ray densitometry. European Journal of Wood and Wood Products, 84(5). https://doi.org/10.1007/s00107-026-02474-6
Vancouver
Karri R, Treu A, Koski A, Larnøy E, Koponen S. Adhesive penetration analysis in birch plywood using X-ray densitometry. European Journal of Wood and Wood Products. 2026;84(5). doi:10.1007/s00107-026-02474-6
BibTeX
@article{Karri2026,
author = {Karri, Ramesh and Treu, Andreas and Koski, Anna and Larnøy, Erik and Koponen, Simo},
title = {Adhesive penetration analysis in birch plywood using X-ray densitometry},
journal = {European Journal of Wood and Wood Products},
year = {2026},
volume = {84},
number = {5},
doi = {10.1007/s00107-026-02474-6}
}
EUVIMED