Green and sustainable fabrication of DES-pretreated high-strength densified wood
Wood Science and Technology · 2024-11 · 58 (5-6) · 1901-1923
DOI: 10.1007/s00226-024-01594-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Wood Science and Technology, online erschienen am 27.08.2024. Verfasst von Akash Madhav Gondaliya und 3 weiteren Autor:innen. Beteiligte Einrichtung: Chemical and Biological Engineering, University of British Columbia, Vancouver, Canada. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canada Foundation for Innovation.
Abstract (Originalsprache)
Wood is a sustainable, benign, and high-performing green structural material readily available in nature that can be used to replace structural materials. However, insufficient mechanical performance (compared to metals and plastic), moisture sensitivity, and susceptibility to microorganism attack make it challenging to use wood as it is for advanced engineering applications. We here present an efficient approach to fabricating densified wood with minimal time and waste generation, demonstrating high mechanical strength, and decreased water penetration on the surface. Wood slabs were treated with deep eutectic solvents (DESs) to solubilize the lignin, followed by in-situ regeneration of dissolved lignin in the wood. Then, the slabs were densified with heat and pressure, turning the wood into a functionalized densified material. Lignin regeneration and morphological changes were observed via two-photon microscopy and Scanning Electron Microscopy (SEM), respectively. The final product is less susceptible to water absorption on the surface and has enhanced flexural strength (> 50% higher), surface hardness (100% increased), and minimal set recovery compared to natural wood. The improved mechanical performance is due to regenerated lignin which acts as a glue and fills spaces present within the interconnected cellulose network inside the wood, forming a highly dense composite during densification. Such enhancement in the properties of DES-densified wood composite makes it a favorable candidate for advanced structural and engineering applications.
Autor:innen und Institutionen
- Chemical and Biological Engineering, University of British Columbia, Vancouver, Canada.
Förderung
- Natural Sciences and Engineering Research Council of Canada
- Canada Foundation for Innovation
Zitieren
APA
Gondaliya, A. M., Hoque, M., Raghunath, S., & Foster, E. J. (2024). Green and sustainable fabrication of DES-pretreated high-strength densified wood. Wood Science and Technology, 58(5-6), 1901-1923. https://doi.org/10.1007/s00226-024-01594-7
Vancouver
Gondaliya AM, Hoque M, Raghunath S, Foster EJ. Green and sustainable fabrication of DES-pretreated high-strength densified wood. Wood Science and Technology. 2024;58(5-6):1901-1923. doi:10.1007/s00226-024-01594-7
BibTeX
@article{Gondaliya2024,
author = {Gondaliya, Akash Madhav and Hoque, Mahfuzul and Raghunath, Sreenath and Foster, E Johan},
title = {Green and sustainable fabrication of DES-pretreated high-strength densified wood},
journal = {Wood Science and Technology},
year = {2024},
volume = {58},
number = {5-6},
pages = {1901--1923},
doi = {10.1007/s00226-024-01594-7}
}
EUVIMED