Long-Term Reproducibility of BMD-Measurements with Clinical QCT Using Simultaneous and Asynchronous Calibration Methods and Different Measurement and Reconstruction Protocols
Calcified Tissue International · 16.10.2024 · 115 (5) · 552-561
DOI: 10.1007/s00223-024-01303-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Calcified Tissue International, online erschienen am 16.10.2024. Verfasst von Sophie du Mont und 7 weiteren Autor:innen. Beteiligte Einrichtung: Section Biomedical Imaging, Department of Radiology and Neuroradiology, University Medical Center Schleswig-Holstein (UKSH), Kiel University, Kiel, G…. Hauptthemen laut MEDLINE: Bone Density, Tomography, X-Ray Computed, Phantoms, Imaging, Osteoporosis. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung, Universitätsklinikum Schleswig-Holstein - Campus Kiel.
Abstract (Originalsprache)
Osteoporosis is underdiagnosed and undertreated. To improve timely fracture risk assessment optimized densitometry methods are required such as opportunistic spinal quantitative computed tomography (QCT). However, it is unclear how to best calibrate these scans and correct for potential scanner drift of QCT when used for monitoring bone mineral density (BMD) changes. We compared gold standard simultaneous calibration with asynchronous calibration methods, assessing mid-term (12 weeks) and long-term (1.5 years) reproducibility of BMD measurements. Cortical and trabecular compartments of the European Spine Phantom were studied with ten different protocols including low dose and high resolution (HR)-modes. Based on weekly phantom data, we compared simultaneous calibration to asynchronous single (termed global) or monthly calibration. The accuracy was better for trabecular measurements than for cortical measurements for all calibration methods. Reproducibility was excellent for all methods and slightly better for asynchronous than for simultaneous calibration both for trabecular and cortical bone. For HR protocols, reproducibility was better than for low dose measurements. In trabecular compartments averaged HR-BMD remained stable for global (− 0.1%/year, ns) but not for simultaneous calibration (− 1.5%/year, p < 0.001). No significant drifts could be detected for averaged low dose BMD (− 0.9 to + 0.8%/year) for either calibration method. Our data suggest that with regard to precision and accuracy measurements with asynchronous calibration are suitable for vertebral BMD assessment (no contrast agents) in clinical practice. Regular (e.g., monthly) stability tests using a calibration phantom could assure long term stability of at least 1 year.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Section Biomedical Imaging, Department of Radiology and Neuroradiology, University Medical Center Schleswig-Holstein (UKSH), Kiel University, Kiel, Germany. sophie@du-mont.de.
- Section Biomedical Imaging, Department of Radiology and Neuroradiology, University Medical Center Schleswig-Holstein (UKSH), Kiel University, Kiel, Germany.
- Department of Computer Science, Multimedia Information Processing Group, Kiel University, Kiel, Germany.
- Department of Radiology and Neuroradiology, University Medical Center Schleswig-Holstein (UKSH), Kiel University, Kiel, Germany.
ORCID-Profile: Sophie du Mont
Förderung
- Bundesministerium für Bildung und Forschung
- Universitätsklinikum Schleswig-Holstein - Campus Kiel
Zitieren
APA
du Mont, S., Barkmann, R., Damm, T., Peña, J., Reinhold, S., Both, M., Mainusch, M., & Glüer, C. C. (2024). Long-Term Reproducibility of BMD-Measurements with Clinical QCT Using Simultaneous and Asynchronous Calibration Methods and Different Measurement and Reconstruction Protocols. Calcified Tissue International, 115(5), 552-561. https://doi.org/10.1007/s00223-024-01303-3
Vancouver
du Mont S, Barkmann R, Damm T, Peña J, Reinhold S, Both M, et al. Long-Term Reproducibility of BMD-Measurements with Clinical QCT Using Simultaneous and Asynchronous Calibration Methods and Different Measurement and Reconstruction Protocols. Calcified Tissue International. 2024;115(5):552-561. doi:10.1007/s00223-024-01303-3
BibTeX
@article{duMont2024,
author = {du Mont, Sophie and Barkmann, Reinhard and Damm, Timo and Peña, Jaime and Reinhold, Stefan and Both, Marcus and Mainusch, Meike and Glüer, Claus-Christian},
title = {Long-Term Reproducibility of BMD-Measurements with Clinical QCT Using Simultaneous and Asynchronous Calibration Methods and Different Measurement and Reconstruction Protocols},
journal = {Calcified Tissue International},
year = {2024},
volume = {115},
number = {5},
pages = {552--561},
doi = {10.1007/s00223-024-01303-3}
}
EUVIMED