EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

Plastic and rubber polymers in urban PM10 by pyrolysis–gas chromatography–mass spectrometry

Tatu Martinmäki, Sanna Saarikoski, Hilkka Timonen, Jarkko V Niemi, Markus Sillanpää

Analytical and Bioanalytical Chemistry · 2025-07 · 417 (17) · 3835-3844

DOI: 10.1007/s00216-025-05906-z ↗

At a glance

Journal article in Analytical and Bioanalytical Chemistry, published online on 2025-05-13. Written by Tatu Martinmäki and 4 co-authors. Institution: Finnish Environment Institute, Research Infrastructure, Mustialankatu 3, 00790, Helsinki, Finland. tatu.martinmaki@syke.fi. Cited 15 times so far (Crossref); 47 references. The full text is freely available (open access, CC BY 4.0). Funded by: Research Council of Finland, Finnish Environment Institute.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Microplastics, including tyre and road wear particles, have been detected in every environmental compartment in both urban and remote areas. However, their contribution to atmospheric particulate matter is still sparsely explored. These airborne micro- and nanosized particles are continuously inhaled and pose risks to the environment and public health. The objectives of this study were to develop and validate a thermoanalytical method for the quantification of microplastics in urban particulate matter. Aerosol particles smaller than 10 µm in aerodynamic diameter (PM 10 ) were sampled at the kerbside in Helsinki, Finland, during spring 2024. The samples were pretreated by homogenization and thermal desorption prior to chemical analysis by micro-furnace pyrolysis–gas chromatography–mass spectrometry. The developed method was validated in terms of selectivity, limits of quantification, linear range, trueness, precision, and measurement uncertainty. Instrument quantification levels were 8–270 ng. Expanded measurement uncertainties were 25–30% and 50–70% for the studied tyre wear rubbers and thermoplastics, respectively. Polyethylene, polyethylene terephthalate, polypropylene, polystyrene, and tyre and road wear particles were detected in urban PM 10 samples, and their sum accounts for 1–3% of total PM 10 . These results represent the level of airborne microplastic particles to which people can be exposed in urban environments. Graphical Abstract

Subjects

Author keywords

AerosolAir pollutionNanoplasticsTyre and road wear particles

Authors and institutions

  • Finnish Environment Institute, Research Infrastructure, Mustialankatu 3, 00790, Helsinki, Finland. tatu.martinmaki@syke.fi.
  • Department of Chemistry, University of Helsinki, P.O. BOX 55, 00014, Helsinki, Finland. tatu.martinmaki@syke.fi.
  • Finnish Meteorological Institute, 00560, Helsinki, Finland.
  • Helsinki Region Environmental Services Authority, 00240, Helsinki, Finland.
  • Finnish Environment Institute, Research Infrastructure, Mustialankatu 3, 00790, Helsinki, Finland. markus.sillanpaa@syke.fi.

Funding

  • Research Council of Finland
  • Finnish Environment Institute

Cite

APA

Martinmäki, T., Saarikoski, S., Timonen, H., Niemi, J. V., & Sillanpää, M. (2025). Plastic and rubber polymers in urban PM10 by pyrolysis–gas chromatography–mass spectrometry. Analytical and Bioanalytical Chemistry, 417(17), 3835-3844. https://doi.org/10.1007/s00216-025-05906-z

Vancouver

Martinmäki T, Saarikoski S, Timonen H, Niemi JV, Sillanpää M. Plastic and rubber polymers in urban PM10 by pyrolysis–gas chromatography–mass spectrometry. Analytical and Bioanalytical Chemistry. 2025;417(17):3835-3844. doi:10.1007/s00216-025-05906-z

BibTeX
@article{Martinmki2025,
  author = {Martinmäki, Tatu and Saarikoski, Sanna and Timonen, Hilkka and Niemi, Jarkko V and Sillanpää, Markus},
  title = {Plastic and rubber polymers in urban PM10 by pyrolysis–gas chromatography–mass spectrometry},
  journal = {Analytical and Bioanalytical Chemistry},
  year = {2025},
  volume = {417},
  number = {17},
  pages = {3835--3844},
  doi = {10.1007/s00216-025-05906-z}
}
Start for free →