EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparison of strain measurement methods for monitoring residual stress build-up in prestressed fiber-reinforced polymer concrete

Michelle Engert, Daniel Christopher Bozó, Larissa Born, Götz T. Gresser, Hans-Christian Möhring

The International Journal of Advanced Manufacturing Technology · 18.11.2026

DOI: 10.1007/s00170-026-19477-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 18.11.2026. Verfasst von Michelle Engert und 4 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universität Stuttgart.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Prestressed fiber-reinforced polymer concrete (PFRPC) facilitates the substitution of conventional steel structural elements in machine tools with vibration-damping lightweight components. While these components offer superior machining results, they demonstrate deficiencies regarding static stiffness. The design of such structures is rather complex due to the diverging material properties and a residual stress field. This challenge requires a fundamental understanding of how the residual stress field within the material affects its mechanical properties. To achieve this objective, it is imperative to conduct a detailed characterization of the residual stress field that is induced by the integration of the prestressed carbon fiber rovings. The experimental findings revealed that the residual stress field is formed in particular by a characteristic, abrupt change in elongation at the instant when the prestressing force is released. Subsequently, the measurement methodology was employed to quantify the influence of temperature during the curing process and the instant of release of the prestressing force on the residual stress field. The findings indicated no consistent influence of the curing temperature on the abrupt change in elongation, whereas the first eigen frequency showed temperature-dependent trends that varied with the time of prestressing force release and require further validation. However, it was observed that a release of the prestressing force after 22 h, as opposed to 24 h as previously studied, resulted in an enhancement of up to 25% in the abrupt change in elongation. However, these samples showed a reduced first eigen frequency, which indicates a reduction in stiffness. This apparent contradiction is attributed to the fact that the Young’s modulus of epoxy resin increases with the curing time. For future sample production, a release of the prestressing force after 24 h is advised. Based on the exploratory results, the curing temperature should be set to at least 22 °C.

Förderung

  • Universität Stuttgart

Zitieren

APA

Engert, M., Bozó, D. C., Born, L., Gresser, G. T., & Möhring, H. (2026). Comparison of strain measurement methods for monitoring residual stress build-up in prestressed fiber-reinforced polymer concrete. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-026-19477-5

Vancouver

Engert M, Bozó DC, Born L, Gresser GT, Möhring H. Comparison of strain measurement methods for monitoring residual stress build-up in prestressed fiber-reinforced polymer concrete. The International Journal of Advanced Manufacturing Technology. 2026. doi:10.1007/s00170-026-19477-5

BibTeX
@article{Engert2026,
  author = {Engert, Michelle and Bozó, Daniel Christopher and Born, Larissa and Gresser, Götz T. and Möhring, Hans-Christian},
  title = {Comparison of strain measurement methods for monitoring residual stress build-up in prestressed fiber-reinforced polymer concrete},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  doi = {10.1007/s00170-026-19477-5}
}
Kostenlos starten →