Long-Gauge Fiber Optic Sensors: Strain Measurement Comparison for Reinforced Concrete Columns
Sensors · 02.01.2025 · 25 (1) · 220
DOI: 10.3390/s25010220 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 02.01.2025. Verfasst von Haoran Lin und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798, Singapore. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute for Infocomm Research, National Research Foundation (NRF), Singapore, Ministry of National Development (MND), Singapore.
Abstract (Originalsprache)
Long-gauge fiber optic sensors have proven to be valuable tools for structural health monitoring, especially in reinforced concrete (RC) beam structures. While their application in this area has been well-documented, their use in RC columns remains relatively unexplored. This suggests a promising avenue for further research and development. This paper presents a thorough comparison of long-gauge fiber optic sensors and traditional measurement tools when used to monitor RC columns under small eccentric compressive loading. The evaluation focuses on the stability and precision of each sensor type. A monitoring system was developed for laboratory testing to assess the performance of various sensor types under specific conditions. The system incorporated four measurement schemes, utilizing a combination of embedded and surface-mounted long-gauge fiber optic sensors, linear variable differential transformers (LVDTs), and point sensors (strain gauges). Long-gauge fiber optic sensors, securely mounted on the concrete surface near the tensile side, were found to accurately measure both large and small deformations, outperforming LVDTs. Compared to strain gauges and embedded optic sensors, the long-gauge fiber optic sensors demonstrated superior average strain measurement and minimal interference from protective covers.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798, Singapore.
- Institute for Infocomm Research, Agency for Science, Technology and Research (A*STAR), 1 Fusionopolis Way, Singapore 138632, Singapore.
- College of Civil Engineering, Nanjing Tech University, Nanjing 211816, China.
ORCID-Profile: Haoran Lin, Wan Hong, Zhihong Yang
Förderung
- Institute for Infocomm Research
- National Research Foundation (NRF), Singapore
- Ministry of National Development (MND), Singapore
- Housing & Development Board (HDB), Singapore
Zitieren
APA
Lin, H., Xu, Z., Hong, W., Yang, Z., Wang, Y., & Li, B. (2025). Long-Gauge Fiber Optic Sensors: Strain Measurement Comparison for Reinforced Concrete Columns. Sensors, 25(1), 220. https://doi.org/10.3390/s25010220
Vancouver
Lin H, Xu Z, Hong W, Yang Z, Wang Y, Li B. Long-Gauge Fiber Optic Sensors: Strain Measurement Comparison for Reinforced Concrete Columns. Sensors. 2025;25(1):220. doi:10.3390/s25010220
BibTeX
@article{Lin2025,
author = {Lin, Haoran and Xu, Zhaowen and Hong, Wan and Yang, Zhihong and Wang, Yixin and Li, Bing},
title = {Long-Gauge Fiber Optic Sensors: Strain Measurement Comparison for Reinforced Concrete Columns},
journal = {Sensors},
year = {2025},
volume = {25},
number = {1},
pages = {220},
doi = {10.3390/s25010220}
}
EUVIMED