EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal degradation of impact‐modified PMMA in mechanical and chemical recycling

Tien Dat Nguyen, Nooshin Saadatkhah, Yanfa Zhuang, Jacopo De Tommaso, Karen Stoeffler, Adrien Faye, Gregory S. Patience

The Canadian Journal of Chemical Engineering · 2026-01 · 104 (1) · 31-43

DOI: 10.1002/cjce.70004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Canadian Journal of Chemical Engineering, online erschienen am 22.06.2025. Verfasst von Tien Dat Nguyen und 6 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly (methyl methacrylate) (PMMA) is a thermoplastic with outstanding tensile strength, UV resistance, and a high level of transparency that has been used widely for optical applications such as glazing in the automobile industry. Mechanical recycling, the most widespread method, degrades the physical properties and prevents reusing PMMA in transparent applications. Thermal depolymerization to recover methyl methacrylate (MMA) monomer is becoming an alternative route for PMMA recycling. In this paper, the thermal depolymerization process of impact‐modified PMMA in a micro fluidized bed reactor was investigated. The pyrolysis was conducted over aluminium oxide () and fluid‐cracking catalyst (FCC) as catalytic beds; sand and SiC as inert beds at temperatures below . A mechanical recycling process was also simulated using sequential injection moulding to investigate its impact on the properties of PMMA. After 5 cycles of injection moulding, the impact strength and optical properties of PMMA were severely diminished due to an increase in free volume and partial thermal degradation. Regarding PMMA pyrolysis, demonstrated limited cracking ability with a maximum MMA yield of 46%, as opposed to FCC, which over‐cracked both PMMA and MMA into coke and unwanted products. In contrast, non‐catalytic beds exhibited higher activity for MMA recovery, with SiC yielding the highest amount of 92% at .

Zitieren

APA

Nguyen, T. D., Saadatkhah, N., Zhuang, Y., Tommaso, J. D., Stoeffler, K., Faye, A., & Patience, G. S. (2026). Thermal degradation of impact‐modified PMMA in mechanical and chemical recycling. The Canadian Journal of Chemical Engineering, 104(1), 31-43. https://doi.org/10.1002/cjce.70004

Vancouver

Nguyen TD, Saadatkhah N, Zhuang Y, Tommaso JD, Stoeffler K, Faye A, et al. Thermal degradation of impact‐modified PMMA in mechanical and chemical recycling. The Canadian Journal of Chemical Engineering. 2026;104(1):31-43. doi:10.1002/cjce.70004

BibTeX
@article{Nguyen2026,
  author = {Nguyen, Tien Dat and Saadatkhah, Nooshin and Zhuang, Yanfa and Tommaso, Jacopo De and Stoeffler, Karen and Faye, Adrien and Patience, Gregory S.},
  title = {Thermal degradation of impact‐modified PMMA in mechanical and chemical recycling},
  journal = {The Canadian Journal of Chemical Engineering},
  year = {2026},
  volume = {104},
  number = {1},
  pages = {31--43},
  doi = {10.1002/cjce.70004}
}
Kostenlos starten →