EUVIMEDEUVIMED entdecken
Crossref

Geometry-driven size effects on fusion behavior and accuracy in Ti-6Al-4V gyroid TPMS structures fabricated by selective laser melting

Zunaira Javaid, Shamoon Al Islam, Yuqi Xiong, Ziqiang Huang, Guangchao Han, Zejiu Ye, Li Yan, Wei Xiong, Zhiyuan Hu, Weicong Chen, Thomas Kvan, Liang Hao

The International Journal of Advanced Manufacturing Technology · 2026-09 · 146 (5-6) · 3715-3743

DOI: 10.1007/s00170-026-18782-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 26.08.2026. Verfasst von Zunaira Javaid und 11 weiteren Autor:innen. Die Arbeit nennt 75 Literaturangaben. Gefördert von: National Key Research and Development, Shenzhen Science and Technology Innovation Program, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The discrepancy between CAD design and manufactured parts within complex metallic Triply Periodic Minimal Surface (TPMS) architecture poses a key challenge for industrial adoption of Selective Laser Melting (SLM). This research elucidates the governing geometry–thermal mechanisms controlling structural accuracy and size-dependent fusion behavior, thereby establishing distinct microscale fusion regimes in experimentally fabricated SLM samples. To interpret the relationship between geometric features, structural complexity, curvature and over-fusion effects caused by laser-induced melting and powder consolidation, planar, square-mesh and sinusoidal wall samples were investigated. Following analysis of geometry-driven fusion behavior and wall-spacing effects, geometric accuracy and pore-size-dependent variations were systematically characterized in Gyroid TPMS samples. Results showed that geometric design fundamentally governed melt-pool behavior and influenced SLM’s ability to replicate intended TPMS geometry. Pore size was identified as dominant factor at sub-millimeter scale driving geometry-dependent inter-wall thermal coupling (permutation feature importance 215.17), followed by geometric design (83.11) and wall thickness (70.01). A balanced laser–geometry-induced thermal interaction established a dual-regime fabrication window, where excessive melting at small pores ( 800 μm). Geometrically acceptable Gyroid TPMS lattices were fabricated with unit-cell sizes of 500 ± 50 μm and wall thicknesses of 134 ± 50 μm, along with stable sub-100 μm thin-walled features, extending SLM from mesoscale fabrication toward microscale resolution limit. This research elucidates fundamental geometric deviations between mathematically generated TPMS structures and experimentally fabricated SLM counterparts, providing adoptable design principles for high-fidelity industrial deployment.

Förderung

  • National Key Research and Development
  • Shenzhen Science and Technology Innovation Program
  • National Natural Science Foundation of China

Zitieren

APA

Javaid, Z., Islam, S. A., Xiong, Y., Huang, Z., Han, G., Ye, Z., Yan, L., Xiong, W., Hu, Z., Chen, W., Kvan, T., & Hao, L. (2026). Geometry-driven size effects on fusion behavior and accuracy in Ti-6Al-4V gyroid TPMS structures fabricated by selective laser melting. The International Journal of Advanced Manufacturing Technology, 146(5-6), 3715-3743. https://doi.org/10.1007/s00170-026-18782-3

Vancouver

Javaid Z, Islam SA, Xiong Y, Huang Z, Han G, Ye Z, et al. Geometry-driven size effects on fusion behavior and accuracy in Ti-6Al-4V gyroid TPMS structures fabricated by selective laser melting. The International Journal of Advanced Manufacturing Technology. 2026;146(5-6):3715-3743. doi:10.1007/s00170-026-18782-3

BibTeX
@article{Javaid2026,
  author = {Javaid, Zunaira and Islam, Shamoon Al and Xiong, Yuqi and Huang, Ziqiang and Han, Guangchao and Ye, Zejiu and Yan, Li and Xiong, Wei and Hu, Zhiyuan and Chen, Weicong and Kvan, Thomas and Hao, Liang},
  title = {Geometry-driven size effects on fusion behavior and accuracy in Ti-6Al-4V gyroid TPMS structures fabricated by selective laser melting},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {146},
  number = {5-6},
  pages = {3715--3743},
  doi = {10.1007/s00170-026-18782-3}
}
Kostenlos starten →