EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Hot forming strategy for lightweight, energy-absorbing B-pillars using 7075 aluminum alloy

Mateusz Skwarski, Karol Jaśkiewicz, Sławomir Polak, Zbigniew Gronostajski, Łukasz Dworzak, Krzysztof Śliz, Sławomir Uzar, Sonia Boczkal, Grzegorz Korpała

The International Journal of Advanced Manufacturing Technology · 2026-07 · 145 (5-6) · 4223-4249

DOI: 10.1007/s00170-026-18600-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 30.06.2026. Verfasst von Mateusz Skwarski und 8 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Narodowe Centrum Badań i Rozwoju, Narodowe Centrum Nauki.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article concerns the hot stamping of the B-pillar made of 7075 aluminum alloy. The first tests were carried out on a simple U-shaped element to determine the thermoplastic treatment’s parameters. Cooling the material from 475 °C to 120 °C at a cooling rate not lower than 62.8 °C/s allowed obtaining a high-strength product (above 560 MPa, hardness above 175 HV1). The determined parameters were verified while stamping the B-pillar, and the optimization of the process allowed to obtain high dimensional and shape accuracy (below 0.5 mm in critical measurement points at the parameters of pressure 0.5 and 3 MPa) and good surface quality (roughness Ra < 0.5 μm for ester oil-based lubricant for hot forming). The changes in properties were explained by TEM microstructure studies and FEM simulations.The MgZn2 strengthening precipitates were observed during structural tests, which confirms that all heat treatment processes (solutioning and artificial aging) were performed correctly. Three-point bending tests (crashworthiness) have proved that a hot-formed aluminum pillar absorbs the same energy as a steel pillar (made of 22MnB5, currently used in automobile bodies). A ready-to-use industrial process has been developed that enables the reliable production of any components made of 7075 aluminum.

Förderung

  • Narodowe Centrum Badań i Rozwoju
  • Narodowe Centrum Nauki

Zitieren

APA

Skwarski, M., Jaśkiewicz, K., Polak, S., Gronostajski, Z., Dworzak, Ł., Śliz, K., Uzar, S., Boczkal, S., & Korpała, G. (2026). Hot forming strategy for lightweight, energy-absorbing B-pillars using 7075 aluminum alloy. The International Journal of Advanced Manufacturing Technology, 145(5-6), 4223-4249. https://doi.org/10.1007/s00170-026-18600-w

Vancouver

Skwarski M, Jaśkiewicz K, Polak S, Gronostajski Z, Dworzak Ł, Śliz K, et al. Hot forming strategy for lightweight, energy-absorbing B-pillars using 7075 aluminum alloy. The International Journal of Advanced Manufacturing Technology. 2026;145(5-6):4223-4249. doi:10.1007/s00170-026-18600-w

BibTeX
@article{Skwarski2026,
  author = {Skwarski, Mateusz and Jaśkiewicz, Karol and Polak, Sławomir and Gronostajski, Zbigniew and Dworzak, Łukasz and Śliz, Krzysztof and Uzar, Sławomir and Boczkal, Sonia and Korpała, Grzegorz},
  title = {Hot forming strategy for lightweight, energy-absorbing B-pillars using 7075 aluminum alloy},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {145},
  number = {5-6},
  pages = {4223--4249},
  doi = {10.1007/s00170-026-18600-w}
}
Kostenlos starten →