Sustainable hardfacing via gtaw powder pre-placement: in situ synthesis of multi-carbides from recycled WC/TIC inserts cermets
The International Journal of Advanced Manufacturing Technology · 2026-06 · 144 (9-10) · 6899-6911
DOI: 10.1007/s00170-026-18283-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 09.05.2026. Verfasst von Poliane de Castro Vieira und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade Estadual Paulista Júlio De Mesquita Filho.
Abstract (Originalsprache)
This study investigates a sustainable and cost-effective route for producing high performance hardfacing via Gas Tungsten Arc Welding (GTAW) using recycled cermet insert powders (WC/TiC). The primary objective was to conduct an exploratory feasibility analysis on the metallurgical transition of recycled feedstock into wear resistant coatings. The filler was deposited on a low carbon steel substrate, resulting in a high dilution rate of approximately 63%. Despite the dilution from the substrate, the weld metal exhibited superior mechanical performance with average hardness exceeding 1000 HV. This is attributed to the absence of iron in the recycled feedstock, unlike conventional filler metals that typically contain high iron concentrations, allowing the carbide forming elements to maintain a dominant reinforcement effect. This outcome is attributed to the strong reinforcement effect promoted by carbide forming elements, which effectively compensate for the substrate dilution. Microstructural analysis confirmed a complex multi carbide composite, including partially dissolved WC, stable TiC, and newly synthesized iron tungsten carbon ternary carbides (M6C and M3C). These findings validate the technical viability of upcycling discarded inserts into high performance feedstock, demonstrating their potential as versatile fluxes for hardfacing across others welding processes. This establishes a sustainable and effective route for producing durable overlays tailored for severe abrasive applications.
Förderung
- Universidade Estadual Paulista Júlio De Mesquita Filho
Zitieren
APA
Vieira, P. D. C., Firmo, L. K. M., Uribe, A. M. M., Arias, A. R., Gallego, J., & Júnior, J. G. F. (2026). Sustainable hardfacing via gtaw powder pre-placement: in situ synthesis of multi-carbides from recycled WC/TIC inserts cermets. The International Journal of Advanced Manufacturing Technology, 144(9-10), 6899-6911. https://doi.org/10.1007/s00170-026-18283-3
Vancouver
Vieira PDC, Firmo LKM, Uribe AMM, Arias AR, Gallego J, Júnior JGF. Sustainable hardfacing via gtaw powder pre-placement: in situ synthesis of multi-carbides from recycled WC/TIC inserts cermets. The International Journal of Advanced Manufacturing Technology. 2026;144(9-10):6899-6911. doi:10.1007/s00170-026-18283-3
BibTeX
@article{Vieira2026,
author = {Vieira, Poliane de Castro and Firmo, Leticia Karolayne Moreira and Uribe, Andres Mauricio Moreno and Arias, Ariel Rodriguez and Gallego, Juno and Júnior, José Gedael Fagundes},
title = {Sustainable hardfacing via gtaw powder pre-placement: in situ synthesis of multi-carbides from recycled WC/TIC inserts cermets},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
volume = {144},
number = {9-10},
pages = {6899--6911},
doi = {10.1007/s00170-026-18283-3}
}
EUVIMED