EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Trapped powder removal from complex lattice structures with small macro pore sizes and dental implant application

Anne Maren Jahn, Hüray Ilayda Kök, Aswin Velumani, Tatjana Melnyk, Sebastian Stammkötter, Michael Müller, Nick Schwarz, Jörg Hermsdorf, Philipp Junker, Frank Walther, Stefan Kaierle

The International Journal of Advanced Manufacturing Technology · 2026-06 · 144 (7-8) · 5001-5019

DOI: 10.1007/s00170-026-17457-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 24.04.2026. Verfasst von Anne Maren Jahn und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gottfried Wilhelm Leibniz Universität Hannover.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) enables the production of complex geometries, which is particularly beneficial for the fabrication of patient-specific implants. However, powder bed fusion processes pose challenges in removing trapped powder from internal structures. Within this study, powder removal from complex parts using ultrasonic (US) cleaning as well as vibration is investigated. First, open cubic gyroid-TPMS lattice structures with macro pores sizing 300, 450, and 600 μm were fabricated and analyzed. Results indicate that mechanical vibration enhances powder removal, particularly for the smallest macro pore size (300 μm), compared to ultrasonic cleaning alone. Second, a dental implant prototype with a closed outer wall and various internal lattice structures was evaluated. Findings suggest that additional design modifications are necessary to facilitate powder removal, especially for lattice macro pores of approximate 280 μm. However, such modifications to the lattice structures may affect the mechanical integrity of the implant. To assess this, numerical simulations were conducted to investigate whether different lattice configurations lead to earlier or even sudden failure under physiological loading conditions.

Förderung

  • Gottfried Wilhelm Leibniz Universität Hannover

Zitieren

APA

Jahn, A. M., Kök, H. I., Velumani, A., Melnyk, T., Stammkötter, S., Müller, M., Schwarz, N., Hermsdorf, J., Junker, P., Walther, F., & Kaierle, S. (2026). Trapped powder removal from complex lattice structures with small macro pore sizes and dental implant application. The International Journal of Advanced Manufacturing Technology, 144(7-8), 5001-5019. https://doi.org/10.1007/s00170-026-17457-3

Vancouver

Jahn AM, Kök HI, Velumani A, Melnyk T, Stammkötter S, Müller M, et al. Trapped powder removal from complex lattice structures with small macro pore sizes and dental implant application. The International Journal of Advanced Manufacturing Technology. 2026;144(7-8):5001-5019. doi:10.1007/s00170-026-17457-3

BibTeX
@article{Jahn2026,
  author = {Jahn, Anne Maren and Kök, Hüray Ilayda and Velumani, Aswin and Melnyk, Tatjana and Stammkötter, Sebastian and Müller, Michael and Schwarz, Nick and Hermsdorf, Jörg and Junker, Philipp and Walther, Frank and Kaierle, Stefan},
  title = {Trapped powder removal from complex lattice structures with small macro pore sizes and dental implant application},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2026},
  volume = {144},
  number = {7-8},
  pages = {5001--5019},
  doi = {10.1007/s00170-026-17457-3}
}
Kostenlos starten →