EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the interlaminar bonding adhesion of the PLA-TPU printed multimaterial

Nil Tarrés, Maria Luisa Garcia-Romeu, Ines Ferrer

The International Journal of Advanced Manufacturing Technology · 15.12.2025

DOI: 10.1007/s00170-025-17099-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 15.12.2025. Verfasst von Nil Tarrés und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitat de Girona.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multi-material 3D printing (MM3DP) combines materials like polylactic acid (PLA) and thermoplastic polyurethane (TPU), allowing parts to have both rigid and flexible sections. This capability is particularly beneficial for applications that require strength and flexibility, such as flexible joints. However, strong adhesion between these materials is difficult due to their different thermal and mechanical properties, often resulting in weak interfaces. This study investigates the effects of layer height (LH), line width (LW), and temperature gradients on PLA-TPU adhesion in fused filament fabrication (FFF). Lap shear tests and failure mode analyses indicate that lower LH and larger LW improve adhesion due to changes in filament contact and internal structure. Additionally, applying a temperature gradient at the PLA-TPU interface enhances bonding consistency, especially at higher LH. Optimal adhesion and lowest variability are observed at lower LH. In some cases, the TPU layer deformed before properly stressing the PLA-TPU bond, due to its low stiffness and high thickness. Moreover, the combination of sample geometry and material properties induced rotational moments during shear tests, which make it difficult to properly assess the interfacial adhesion. These findings provide practical guidelines for improving interfacial adhesion in multi-material prints and highlight the need for further methodological improvements.

Förderung

  • Universitat de Girona

Zitieren

APA

Tarrés, N., Garcia-Romeu, M. L., & Ferrer, I. (2025). On the interlaminar bonding adhesion of the PLA-TPU printed multimaterial. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-025-17099-x

Vancouver

Tarrés N, Garcia-Romeu ML, Ferrer I. On the interlaminar bonding adhesion of the PLA-TPU printed multimaterial. The International Journal of Advanced Manufacturing Technology. 2025. doi:10.1007/s00170-025-17099-x

BibTeX
@article{Tarrs2025,
  author = {Tarrés, Nil and Garcia-Romeu, Maria Luisa and Ferrer, Ines},
  title = {On the interlaminar bonding adhesion of the PLA-TPU printed multimaterial},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  doi = {10.1007/s00170-025-17099-x}
}
Kostenlos starten →