EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction stir welding of additively manufactured CuNiSiCr: effect of post-weld heat treatments on microstructure and mechanical properties

Mohammad Abankar, Vincenzo Lunetto, Pasquale Russo Spena

The International Journal of Advanced Manufacturing Technology · 2025-12 · 141 (9-10) · 5429-5445

DOI: 10.1007/s00170-025-16924-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 20.11.2025. Verfasst von Mohammad Abankar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Torino.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the friction stir welding (FSW) of a CuNiSiCr alloy produced by laser powder bed fusion and the role of post-weld heat treatments in the microstructural evolution and mechanical performance of welded joints. The as-built alloy exhibited columnar grains, porosity, and lack-of-fusion defects. FSW refined the microstructure within the stir zone (SZ) and dramatically reduced porosity, both in pore number and size, as revealed by X-ray tomography. Mechanical testing showed that FSW joints outperformed the as-built specimens, with increased yield and tensile strengths, albeit with reduced ductility. Aging at 500 °C markedly enhanced hardness across both the base material and the SZ, achieving peak values of about 195 HV after 2 h. Peak-aged joints reached yield and tensile strengths that were 17% and 16% higher, respectively, than those of the base alloy. Direct aging proved as effective as conventional solution treatment and aging, simplifying the heat treatment route. These findings show that FSW followed by direct aging offers a promising approach for obtaining high-performance joints, providing a viable pathway for producing large, complex, additively manufactured CuNiSiCr assemblies with improved structural integrity.

Förderung

  • Politecnico di Torino

Zitieren

APA

Abankar, M., Lunetto, V., & Spena, P. R. (2025). Friction stir welding of additively manufactured CuNiSiCr: effect of post-weld heat treatments on microstructure and mechanical properties. The International Journal of Advanced Manufacturing Technology, 141(9-10), 5429-5445. https://doi.org/10.1007/s00170-025-16924-7

Vancouver

Abankar M, Lunetto V, Spena PR. Friction stir welding of additively manufactured CuNiSiCr: effect of post-weld heat treatments on microstructure and mechanical properties. The International Journal of Advanced Manufacturing Technology. 2025;141(9-10):5429-5445. doi:10.1007/s00170-025-16924-7

BibTeX
@article{Abankar2025,
  author = {Abankar, Mohammad and Lunetto, Vincenzo and Spena, Pasquale Russo},
  title = {Friction stir welding of additively manufactured CuNiSiCr: effect of post-weld heat treatments on microstructure and mechanical properties},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {141},
  number = {9-10},
  pages = {5429--5445},
  doi = {10.1007/s00170-025-16924-7}
}
Kostenlos starten →