EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative analysis of stress–strain models for A36 steel in monotonic loading: performance, complexity, and sensitivity

Camilo Andrés Gonzalez Olier, Jorge Enrique Gonzalez Coneo

The International Journal of Advanced Manufacturing Technology · 2025-08 · 139 (7-8) · 3785-3800

DOI: 10.1007/s00170-025-16068-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 23.07.2025. Verfasst von Camilo Andrés Gonzalez Olier und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Simon Bolivar University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the accuracy, complexity, and sensitivity of the Hollomon, Swift, Voce, and Menegotto-Pinto models in predicting the stress–strain behavior of A36 steel under plastic deformation. All models achieved high accuracy, with R 2 > 0.99 and mean absolute percentage errors (Mape) below 1.68%. The Swift and Voce models demonstrated the highest accuracy with the lowest mean squared errors (5.85 MPa 2 and 11.06 MPa 2 , respectively). The Menegotto-Pinto model, despite its higher complexity, exhibited lower sensitivity to parameter variations, followed by the Voce model. Conversely, the Hollomon and Swift models were more sensitive to parameter uncertainties. In terms of math and calibration complexity, the models ranked from simplest to most complex as follows: Hollomon, Swift, Voce, and Menegotto-Pinto. It is expected that this research will serve as a basis for the selection of these models for the implementation of simulations of manufacturing processes and failure in A36 steels, by means of finite element or analytical models.

Förderung

  • Simon Bolivar University

Zitieren

APA

Olier, C. A. G., & Coneo, J. E. G. (2025). Comparative analysis of stress–strain models for A36 steel in monotonic loading: performance, complexity, and sensitivity. The International Journal of Advanced Manufacturing Technology, 139(7-8), 3785-3800. https://doi.org/10.1007/s00170-025-16068-8

Vancouver

Olier CAG, Coneo JEG. Comparative analysis of stress–strain models for A36 steel in monotonic loading: performance, complexity, and sensitivity. The International Journal of Advanced Manufacturing Technology. 2025;139(7-8):3785-3800. doi:10.1007/s00170-025-16068-8

BibTeX
@article{Olier2025,
  author = {Olier, Camilo Andrés Gonzalez and Coneo, Jorge Enrique Gonzalez},
  title = {Comparative analysis of stress–strain models for A36 steel in monotonic loading: performance, complexity, and sensitivity},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2025},
  volume = {139},
  number = {7-8},
  pages = {3785--3800},
  doi = {10.1007/s00170-025-16068-8}
}
Kostenlos starten →