EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Large-scale investigation of dry orthogonal cutting experiments Ti6Al4V and Ck45

Hagen Klippel iD, Stefan Süssmaier, Nanyuan Zhang, Michal Kuffa, Konrad Wegener

The International Journal of Advanced Manufacturing Technology · 2024-11 · 135 (5-6) · 2871-2908

DOI: 10.1007/s00170-024-14597-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 24.10.2024. Verfasst von Hagen Klippel und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Machine Tools and Manufacturing (IWF), Department of Mechanical and Process Engineering, ETH Zürich, Leonhardstrasse 21, 8092 Zürich, Sw…. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The numerical simulation of metal cutting processes requires material data for constitutive equations, which cannot be obtained with standard material testing procedures. Instead, inverse identifications of material parameters within numerical simulation models of the cutting experiment itself are necessary. This report presents the findings from a large-scale study of dry orthogonal cutting experiments on Ti6Al4V (Grade 5) and Ck45 (AISI 1045). It includes material characterization through microstructural analysis and tensile tests. The study details the measurement of cutting insert geometries and cutting edge radii, evaluates process forces, deduces friction coefficients and coefficients for Kienzle’s force model, and analyzes chip forms and thicknesses as well as built-up edge formation depending on the process parameters. The collected data, stored in pCloud, can support other researchers in the field, e.g. for recomputations within numerical models or inverse parameter identifications. The dataset includes force measurements, cutting edge scans, and chip images including longitudinal cross-sections of chips.

Schlagwörter

Stichwörter der Autor:innen

AISI 1045Dry orthogonal cuttingMaterial characterisationTi6Al4V

Autor:innen und Institutionen

  • Institute of Machine Tools and Manufacturing (IWF), Department of Mechanical and Process Engineering, ETH Zürich, Leonhardstrasse 21, 8092 Zürich, Switzerland.

ORCID-Profile: Hagen Klippel

Förderung

  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung

Zitieren

APA

Klippel, H., Süssmaier, S., Zhang, N., Kuffa, M., & Wegener, K. (2024). Large-scale investigation of dry orthogonal cutting experiments Ti6Al4V and Ck45. The International Journal of Advanced Manufacturing Technology, 135(5-6), 2871-2908. https://doi.org/10.1007/s00170-024-14597-2

Vancouver

Klippel H, Süssmaier S, Zhang N, Kuffa M, Wegener K. Large-scale investigation of dry orthogonal cutting experiments Ti6Al4V and Ck45. The International Journal of Advanced Manufacturing Technology. 2024;135(5-6):2871-2908. doi:10.1007/s00170-024-14597-2

BibTeX
@article{Klippel2024,
  author = {Klippel, Hagen and Süssmaier, Stefan and Zhang, Nanyuan and Kuffa, Michal and Wegener, Konrad},
  title = {Large-scale investigation of dry orthogonal cutting experiments Ti6Al4V and Ck45},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {135},
  number = {5-6},
  pages = {2871--2908},
  doi = {10.1007/s00170-024-14597-2}
}
Kostenlos starten →