EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring a novel chamfered tool design for short duration refill friction stir spot welds of high strength aluminium

Jonathan Draper, Sebastian Fritsche, Sergio de Traglia Amancio-Filho, Alexander Galloway, Athanasios Toumpis

The International Journal of Advanced Manufacturing Technology · 2024-04 · 131 (12) · 5867-5879

DOI: 10.1007/s00170-024-13336-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 05.03.2024. Verfasst von Jonathan Draper und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scottish Association for Metals, TAKEOFF.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates refill friction stir spot welded joints of AA2024-T3 aluminium alloy, produced with short welding times between 3 s and 0.75 s. A novel tool geometry that incorporates a chamfer on the inner edge of the shoulder tip is investigated as a means of improving joint quality at short welding times by easing material flow during the refill stage. The influence of shoulder design on weld microstructure, defect formation, material flow, and mechanical properties was assessed. When compared with a standard shoulder geometry, it was found that the introduction of a chamfer on the inner tip edge improved material flow during the refill stage and led to improved material mixing at the weld periphery. The formation of voids in the region of the weld periphery was eliminated and tensile lap-shear strength of the welded joints was increased by 19% to 7.2 kN, and 27% to 8.16 kN, for 0.75 s and 1.5 s duration welds, respectively.

Förderung

  • Scottish Association for Metals
  • TAKEOFF

Zitieren

APA

Draper, J., Fritsche, S., Amancio-Filho, S. D. T., Galloway, A., & Toumpis, A. (2024). Exploring a novel chamfered tool design for short duration refill friction stir spot welds of high strength aluminium. The International Journal of Advanced Manufacturing Technology, 131(12), 5867-5879. https://doi.org/10.1007/s00170-024-13336-x

Vancouver

Draper J, Fritsche S, Amancio-Filho SDT, Galloway A, Toumpis A. Exploring a novel chamfered tool design for short duration refill friction stir spot welds of high strength aluminium. The International Journal of Advanced Manufacturing Technology. 2024;131(12):5867-5879. doi:10.1007/s00170-024-13336-x

BibTeX
@article{Draper2024,
  author = {Draper, Jonathan and Fritsche, Sebastian and Amancio-Filho, Sergio de Traglia and Galloway, Alexander and Toumpis, Athanasios},
  title = {Exploring a novel chamfered tool design for short duration refill friction stir spot welds of high strength aluminium},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {131},
  number = {12},
  pages = {5867--5879},
  doi = {10.1007/s00170-024-13336-x}
}
Kostenlos starten →