EUVIMEDEUVIMED entdecken
Crossref

Effect of tool ratio on the performance of 6061-T6 aluminum alloy refill friction stir spot welded zone

Di Jiang, Igor Kolupaev, HongFeng Wang, Xiaole Ge

Materials Science and Technology · 2026-12 · 42 (18) · 1829-1842

DOI: 10.1177/02670836251345981 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 26.05.2025. Verfasst von Di Jiang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: Excellent Young Scientists Fund, Huangshan University, Anhui Provincial Department of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The refill friction stir spot welding (RFSSW) of defect-free aluminum alloy was performed using a fixed-diameter shoulder and probes of different diameters. The process parameters were set at a rotational speed of 1400 rpm and welding speeds of 30 mm/min, 40 mm/min, and 50 mm/min. The results showed that the grain size in the weld zone was refined. The joint residual line (JRL) did not affect the ultimate lap shear force (ULSF) of the weld zone. A higher “HOOK” height increased the ULSF by avoiding the load plane. As a result, the ULSF was high at different welding speeds for larger probe diameters. It was not sensitive to process parameters. However, the hardness was lower.

Förderung

  • Excellent Young Scientists Fund
  • Huangshan University
  • Anhui Provincial Department of Education

Zitieren

APA

Jiang, D., Kolupaev, I., Wang, H., & Ge, X. (2026). Effect of tool ratio on the performance of 6061-T6 aluminum alloy refill friction stir spot welded zone. Materials Science and Technology, 42(18), 1829-1842. https://doi.org/10.1177/02670836251345981

Vancouver

Jiang D, Kolupaev I, Wang H, Ge X. Effect of tool ratio on the performance of 6061-T6 aluminum alloy refill friction stir spot welded zone. Materials Science and Technology. 2026;42(18):1829-1842. doi:10.1177/02670836251345981

BibTeX
@article{Jiang2026,
  author = {Jiang, Di and Kolupaev, Igor and Wang, HongFeng and Ge, Xiaole},
  title = {Effect of tool ratio on the performance of 6061-T6 aluminum alloy refill friction stir spot welded zone},
  journal = {Materials Science and Technology},
  year = {2026},
  volume = {42},
  number = {18},
  pages = {1829--1842},
  doi = {10.1177/02670836251345981}
}
Kostenlos starten →