Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions
IEEJ Transactions on Electrical and Electronic Engineering · 2026-07-06
DOI: 10.1002/tee.70378 ↗At a glance
Journal article in IEEJ Transactions on Electrical and Electronic Engineering, published online on 2026-07-06. Written by Hiroyuki Arakawa and 4 co-authors. 14 references.
Abstract (original language)
We developed and validated a wind speed calibration method using IMU (Inertial measurement units) and GNSS (Global Navigation Satellite System) velocity data on commercial multirotor UAVs (Unmanned Aerial Vehicle). Assuming a simple static model, time‐averaged wind speed was calibrated using only the UAV's velocity obtained from GNSS and tilt angle measured by the onboard IMU. This method was applied in the open air under windy conditions, where the ambient wind speed was estimated in situ to be approximately 2–5 m/s. Unnecessary wind speed information is removed by performing a back‐and‐forth movement. Separately, comparisons with wind tunnel experiments demonstrated that the calibration results exhibited estimation errors within 0.7 m/s for wind speeds of 1–8 m/s and up to 1.9 m/s for 9–10 m/s. The proposed method offers a simple and practical alternative to conventional wind tunnel‐based approaches for wind speed calibration. © 2026 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC.
Cite
APA
Arakawa, H., Sugita, S., Sasaki, M., Yamada, T., & Inagaki, S. (2026). Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions. IEEJ Transactions on Electrical and Electronic Engineering. https://doi.org/10.1002/tee.70378
Vancouver
Arakawa H, Sugita S, Sasaki M, Yamada T, Inagaki S. Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions. IEEJ Transactions on Electrical and Electronic Engineering. 2026. doi:10.1002/tee.70378
BibTeX
@article{Arakawa2026,
author = {Arakawa, Hiroyuki and Sugita, Satoru and Sasaki, Makoto and Yamada, Takuma and Inagaki, Shigeru},
title = {Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions},
journal = {IEEJ Transactions on Electrical and Electronic Engineering},
year = {2026},
doi = {10.1002/tee.70378}
}
EUVIMED