EUVIMEDEUVIMED entdecken
Crossref

Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions

Hiroyuki Arakawa, Satoru Sugita, Makoto Sasaki, Takuma Yamada, Shigeru Inagaki

IEEJ Transactions on Electrical and Electronic Engineering · 06.07.2026

DOI: 10.1002/tee.70378 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEJ Transactions on Electrical and Electronic Engineering, online erschienen am 06.07.2026. Verfasst von Hiroyuki Arakawa und 4 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We developed and validated a wind speed calibration method using IMU (Inertial measurement units) and GNSS (Global Navigation Satellite System) velocity data on commercial multirotor UAVs (Unmanned Aerial Vehicle). Assuming a simple static model, time‐averaged wind speed was calibrated using only the UAV's velocity obtained from GNSS and tilt angle measured by the onboard IMU. This method was applied in the open air under windy conditions, where the ambient wind speed was estimated in situ to be approximately 2–5 m/s. Unnecessary wind speed information is removed by performing a back‐and‐forth movement. Separately, comparisons with wind tunnel experiments demonstrated that the calibration results exhibited estimation errors within 0.7 m/s for wind speeds of 1–8 m/s and up to 1.9 m/s for 9–10 m/s. The proposed method offers a simple and practical alternative to conventional wind tunnel‐based approaches for wind speed calibration. © 2026 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC.

Zitieren

APA

Arakawa, H., Sugita, S., Sasaki, M., Yamada, T., & Inagaki, S. (2026). Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions. IEEJ Transactions on Electrical and Electronic Engineering. https://doi.org/10.1002/tee.70378

Vancouver

Arakawa H, Sugita S, Sasaki M, Yamada T, Inagaki S. Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions. IEEJ Transactions on Electrical and Electronic Engineering. 2026. doi:10.1002/tee.70378

BibTeX
@article{Arakawa2026,
  author = {Arakawa, Hiroyuki and Sugita, Satoru and Sasaki, Makoto and Yamada, Takuma and Inagaki, Shigeru},
  title = {Time‐Averaged Wind Speed Calibration Using GNSS and IMU on a Multirotor UAV under Natural Wind Conditions},
  journal = {IEEJ Transactions on Electrical and Electronic Engineering},
  year = {2026},
  doi = {10.1002/tee.70378}
}
Kostenlos starten →