Prediction of the seismic behavior of concrete beams strengthened with aluminum alloy bars and/or basalt fiber‐reinforced polymer bars
The Structural Design of Tall and Special Buildings · 2022-03 · 31 (4)
DOI: 10.1002/tal.1911 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Structural Design of Tall and Special Buildings, 2021-12. Verfasst von Guohua Xing und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 74 Literaturangaben. Gefördert von: Natural Science Foundation of Shaanxi Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
This paper investigated the seismic performance of reinforced concrete (RC) beams strengthened with aluminum alloy (AA) rods and/or basalt fiber‐reinforced polymer (BFRP) rods using the near‐surface mounted (NSM) technique under a low‐cycle reversed loading test. A numerical calculation procedure was presented based on the strain compatibility and static equilibrium principles for estimating the moment–curvature response of these strengthened beams. The bending deflection and shear deflection were determined by the curvature distribution and shear strain distribution along the beam length, respectively. The results showed that the strengthened beams experienced three failure modes: intermediate crack‐induced debonding (ICD), critical diagonal crack (CDC) debonding, and concrete cover separation (CCS). Increasing the number of strengthening bars on each side significantly enhances the load‐carrying capacity of the beams strengthened with either AA or BFRP bars. The predictive accuracy of the proposed methodology was evaluated by comparing the predicted load‐carrying capacities and deflections to the test characteristic points. The proposed theoretical model provided good verification of the load‐carrying capacities and deflections with high accuracy.
Förderung
- Natural Science Foundation of Shaanxi Province
- National Natural Science Foundation of China
Zitieren
APA
Xing, G., Wang, H., Chang, Z., & Ma, K. (2022). Prediction of the seismic behavior of concrete beams strengthened with aluminum alloy bars and/or basalt fiber‐reinforced polymer bars. The Structural Design of Tall and Special Buildings, 31(4). https://doi.org/10.1002/tal.1911
Vancouver
Xing G, Wang H, Chang Z, Ma K. Prediction of the seismic behavior of concrete beams strengthened with aluminum alloy bars and/or basalt fiber‐reinforced polymer bars. The Structural Design of Tall and Special Buildings. 2022;31(4). doi:10.1002/tal.1911
BibTeX
@article{Xing2022,
author = {Xing, Guohua and Wang, Haonan and Chang, Zhaoqun and Ma, Kaize},
title = {Prediction of the seismic behavior of concrete beams strengthened with aluminum alloy bars and/or basalt fiber‐reinforced polymer bars},
journal = {The Structural Design of Tall and Special Buildings},
year = {2022},
volume = {31},
number = {4},
doi = {10.1002/tal.1911}
}
EUVIMED