EUVIMEDDescubrir EUVIMED
Open access · CC BY 4.0

Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces

Jiaqi Zong, Mahdieh Shojaei Baghini, Oana Dobre, Carlos García Núñez

SmartSys · 2026-12 · 2 (4)

DOI: 10.1002/sys3.70046 ↗

At a glance

Journal article in SmartSys, published online on 2026-11-15. Written by Jiaqi Zong and 3 co-authors. 51 references. The full text is freely available (open access, CC BY 4.0).

ResumenDatos bibliográficosCiteRelated studies

Abstract (original language)

Flexible and wearable piezoelectric sensors are attracting increasing interest in motion monitoring and human–machine interface applications, as they enable self‐powered signal transduction from mechanical deformation into electrical output. In this work, electrospun poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) fibres incorporating zinc oxide (ZnO) nanoparticles (NPs) are developed as hybrid piezoelectric materials. The effects of electrospinning parameters and ZnO NP loading on fibre morphology, NP dispersion, structure, and piezoelectric performance are systematically investigated. Raman spectroscopy, XRD, FTIR, and XPS confirm the successful incorporation of crystalline wurtzite ZnO within a semi‐crystalline PHBV matrix, while preserving the main chemical structure of the polymer. Surface chemical analysis further indicates Zn–O contributions and changes in the oxygen‐containing ester/carbonyl environments of PHBV, supporting interfacial interactions between ZnO nanoparticles and the polymer matrix. Piezoelectric measurements show enhanced performance, with the piezoelectric coefficient, d 33 , increasing to 0.320 pC N −1 for PHBV/ZnO composites, corresponding to a 213.7% improvement compared with pristine PHBV fibres prepared under the same conditions. Vector network analyser measurements further reveal composition‐dependent values of the effective electromechanical coupling coefficient, k eff , ranging from 13.13% to 18.64%. The fibres are encapsulated in PDMS to fabricate flexible strain sensors, which demonstrate stable and repeatable voltage outputs under different bending angles, as well as reliable hand‐gesture recognition capability. These results highlight PHBV/ZnO composite fibres as an effective platform for flexible and self‐powered wearable sensing applications.

Cite

APA

Zong, J., Baghini, M. S., Dobre, O., & Núñez, C. G. (2026). Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces. SmartSys, 2(4). https://doi.org/10.1002/sys3.70046

Vancouver

Zong J, Baghini MS, Dobre O, Núñez CG. Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces. SmartSys. 2026;2(4). doi:10.1002/sys3.70046

BibTeX
@article{Zong2026,
  author = {Zong, Jiaqi and Baghini, Mahdieh Shojaei and Dobre, Oana and Núñez, Carlos García},
  title = {Electrospun Biopolymer–Nanoparticle Hybrids With Amplified Piezoelectricity for Flexible Human–Machine Interfaces},
  journal = {SmartSys},
  year = {2026},
  volume = {2},
  number = {4},
  doi = {10.1002/sys3.70046}
}
Start for free →