Marine Fuel Cell Hybrid Power Systems: Architectures, Energy Management Strategies, and Shipboard Applications
SmartSys · 2026-12 · 2 (4)
DOI: 10.1002/sys3.70044 ↗At a glance
Journal article in SmartSys, published online on 2026-11-15. Written by Dongdong Chigan and 9 co-authors. 94 references. The full text is freely available (open access, CC BY 4.0).
Abstract (original language)
Maritime decarbonization has intensified interest in fuel cell hybrid power systems as a promising pathway toward low‐emission and eventually zero‐emission shipping. In such systems, the energy management strategy (EMS) plays a crucial role in coordinating fuel cells and energy storage devices, thereby shaping system efficiency, operational economy, dynamic performance, and component lifetime. However, the existing review studies remain largely automotive‐oriented or focus on isolated technologies, with limited attention to the specific operating profiles, architectural choices, and control requirements of marine applications. To address this gap, this paper presents a ship‐oriented review of fuel cell hybrid power systems and their EMSs from an optimal design perspective. First, the dynamic characteristics and operational constraints of proton exchange membrane fuel cells (PEMFCs) and solid oxide fuel cells (SOFCs) relevant to shipboard applications are analyzed. Second, EMS hybrid architectures are reviewed from two complementary perspectives: energy‐unit composition (e.g., fuel cell–battery, fuel cell–battery–supercapacitor) and direct current (DC)/DC interface topology. Third, EMS approaches are classified and compared, including rule‐based, optimization‐based, learning‐based, and hybrid/hierarchical strategies. The review shows that PEMFC‐based systems and SOFC‐based systems impose fundamentally different EMS requirements. PEMFC‐oriented EMSs should focus on dynamic load allocation, transient suppression, and degradation mitigation, whereas SOFC‐oriented EMSs should emphasize steady baseload operation, hierarchical supervisory control, and thermal–electrical coordination. Based on these insights, a design‐oriented mapping logic linking fuel cell type, hybrid architecture, EMS form, and ship mission profile is synthesized. The analysis suggests that system design should follow a mission‐driven logic in which ship operating characteristics determine load profiles, which then guide the selection of fuel cell technology, energy storage configuration, and EMS hierarchy. Finally, the key research needs are discussed, including health‐aware EMS, multi‐timescale coordination, digital‐twin‐based validation, and lifecycle‐oriented design.
Cite
APA
Chigan, D., Xiao, Y., Gao, Z., Du, Y., Liu, H., Xia, Z., He, C., Huangfu, Y., Wu, Z., & Li, Z. (2026). Marine Fuel Cell Hybrid Power Systems: Architectures, Energy Management Strategies, and Shipboard Applications. SmartSys, 2(4). https://doi.org/10.1002/sys3.70044
Vancouver
Chigan D, Xiao Y, Gao Z, Du Y, Liu H, Xia Z, et al. Marine Fuel Cell Hybrid Power Systems: Architectures, Energy Management Strategies, and Shipboard Applications. SmartSys. 2026;2(4). doi:10.1002/sys3.70044
BibTeX
@article{Chigan2026,
author = {Chigan, Dongdong and Xiao, Yizhuo and Gao, Zibo and Du, Yuhua and Liu, Hong and Xia, Zongsheng and He, Changxiang and Huangfu, Yigeng and Wu, Zhen and Li, Zhi‐Peng},
title = {Marine Fuel Cell Hybrid Power Systems: Architectures, Energy Management Strategies, and Shipboard Applications},
journal = {SmartSys},
year = {2026},
volume = {2},
number = {4},
doi = {10.1002/sys3.70044}
}
EUVIMED