EUVIMEDEUVIMED entdecken
Crossref

Resistance factor calibration for fiber‐reinforced polymer‐reinforced concrete columns based on a sectional analysis model with fiber‐reinforced polymer compression contribution

Nam Nguyen Van, Phan Duy Nguyen, Vu Hiep Dang

Structural Concrete · 13.11.2026

DOI: 10.1002/suco.70876 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Structural Concrete, online erschienen am 13.11.2026. Verfasst von Nam Nguyen Van und 2 weiteren Autor:innen. Die Arbeit nennt 88 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to calibrate the reliability‐based resistance factor ϕ for a sectional model predicting the load‐carrying capacity of rectangular fiber‐reinforced polymer‐reinforced concrete (FRP‐RC) columns under eccentric compression. A mechanical model accounting for the compressive contribution of FRP reinforcement through a factor α f is developed based on 144 experimental specimens. The novelty lies in explicitly incorporating FRP compression effects while quantifying residual error ( M R ), and subsequently performing reliability‐based calibration using the FORM framework. Specimen‐specific optimization revealed two subgroups associated with differences in relative eccentricity and longitudinal reinforcement ratio. Separate optimization yielded α f = 0.0798 and 0.3507. The overlapping interquartile ranges ( e / h = 0.229–0.395 and ρ f = 0.701–1.397%) characterize a preliminary transition region between the two subgroups. The subgroup‐specific treatment improved predictive accuracy and yielded higher resistance factors, while α f,final = 0.0798 was conservatively retained for the transition or unclassified region pending further validation. Calibration for a target reliability index β T = 3.5 and L/D = 0.5 produced ϕ = 0.473. A parametric assessment of 12,960 design cases showed generally acceptable reliability, with lower values concentrated at low FRP reinforcement ratios and large eccentricities. The proposed framework links mechanical modeling, residual characterization, and reliability‐based design calibration for practical applications.

Zitieren

APA

Van, N. N., Nguyen, P. D., & Dang, V. H. (2026). Resistance factor calibration for fiber‐reinforced polymer‐reinforced concrete columns based on a sectional analysis model with fiber‐reinforced polymer compression contribution. Structural Concrete. https://doi.org/10.1002/suco.70876

Vancouver

Van NN, Nguyen PD, Dang VH. Resistance factor calibration for fiber‐reinforced polymer‐reinforced concrete columns based on a sectional analysis model with fiber‐reinforced polymer compression contribution. Structural Concrete. 2026. doi:10.1002/suco.70876

BibTeX
@article{Van2026,
  author = {Van, Nam Nguyen and Nguyen, Phan Duy and Dang, Vu Hiep},
  title = {Resistance factor calibration for fiber‐reinforced polymer‐reinforced concrete columns based on a sectional analysis model with fiber‐reinforced polymer compression contribution},
  journal = {Structural Concrete},
  year = {2026},
  doi = {10.1002/suco.70876}
}
Kostenlos starten →