Sustainable fly ash‐based geopolymer composites: The influence of RAP aggregates and silica fume on strength, durability, and microstructural properties
Structural Concrete · 2026-02 · 27 (1) · 966-997
DOI: 10.1002/suco.70042 ↗Kurz gefasst
Fachartikel in der Zeitschrift Structural Concrete, online erschienen am 20.03.2025. Verfasst von Ahmet Benli und 5 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 112 Literaturangaben.
Abstract (Originalsprache)
This study investigates the effects of reclaimed asphalt pavement (RAP) aggregates and silica fume (SF) on the mechanical, durability, and microstructural properties of fly ash (FA)‐based geopolymer composites (GC) under varying curing conditions. GCs were prepared with RAP contents of 0%, 15%, 30%, and 60% as replacements for river aggregate (RA) and with partial replacement of FA by 15% SF. Samples were cured at 60°C and 90°C, and their performance was evaluated through compressive and flexural strength tests, freeze–thaw (F‐T) resistance, high‐temperature exposure, sorptivity, porosity, and microstructural analysis. The results reveal that substituting RA with 15% RAP demonstrated the optimal content for enhancing compressive strength, with increases of 33.64% at 60°C and 8.04% at 90°C. At 30% RAP, the improvements were smaller (7.36% at 60°C and 7.37% at 90°C), while 60% RAP led to strength reductions of 0.97% and 8.12% at 60°C and 90°C, respectively. The mixture containing 100% FA and 15% RAP as a replacement for RA demonstrated the best high‐temperature performance, exhibiting the lowest strength loss at 750°C. The lowest strength loss after 50 F‐T cycles was observed in the mixture cured at 90°C with 30% RAP and 100% FA. Mixtures with 100% FA and 30% RAP cured at 90°C exhibited the lowest strength loss after 50 F‐T cycles, demonstrating enhanced durability. Mixtures containing 100% FA exhibited superior F‐T performance with the incorporation of RAP compared with the reference mixture without RAP, irrespective of curing temperature. Mixtures with 100% FA and 15% RAP demonstrated the highest resistance to elevated temperatures, with minimal strength loss at 750°C. However, increasing RAP content to 30% and 60% led to greater deterioration due to thermal degradation of bitumen‐coated aggregates. Replacing FA with 15% SF significantly reduced high‐temperature resistance, causing over 90% strength loss at 750°C.
Zitieren
APA
Benli, A., Öz, A., Kılıç, D., Tortum, A., Yıldız, İ., & Kaplan, G. (2026). Sustainable fly ash‐based geopolymer composites: The influence of RAP aggregates and silica fume on strength, durability, and microstructural properties. Structural Concrete, 27(1), 966-997. https://doi.org/10.1002/suco.70042
Vancouver
Benli A, Öz A, Kılıç D, Tortum A, Yıldız İ, Kaplan G. Sustainable fly ash‐based geopolymer composites: The influence of RAP aggregates and silica fume on strength, durability, and microstructural properties. Structural Concrete. 2026;27(1):966-997. doi:10.1002/suco.70042
BibTeX
@article{Benli2026,
author = {Benli, Ahmet and Öz, Ali and Kılıç, Dilan and Tortum, Ahmet and Yıldız, İsmail and Kaplan, Gökhan},
title = {Sustainable fly ash‐based geopolymer composites: The influence of RAP aggregates and silica fume on strength, durability, and microstructural properties},
journal = {Structural Concrete},
year = {2026},
volume = {27},
number = {1},
pages = {966--997},
doi = {10.1002/suco.70042}
}
EUVIMED