EUVIMEDEUVIMED entdecken
Crossref

Simplified method for predicting the internal forces in strut‐and‐tie model of cable pylon anchorage zone in a cable‐stayed bridge

Shengyu Li, Erwin Lim, Zhengqing Chen, Yu Hong, Qianhui Pu

Structural Concrete · 2024-12 · 25 (6) · 4134-4149

DOI: 10.1002/suco.202300926 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Structural Concrete, online erschienen am 15.08.2024. Verfasst von Shengyu Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical behavior of cable pylon anchorage zone in a cable‐stayed bridge is complex due to high localized stresses. A strut‐and‐tie model (STM) has been introduced in this paper, which is recommended as an efficient way to analyze the disturbed region. However, predicting the internal forces in the tie members in the STM by integrating stresses was time‐consuming and inefficient. To address this issue, the principle of minimum strain energy was used to analyze the STM of the cable pylon anchorage zone. A simplified method was presented to assess the internal forces in the cable pylon anchorage zone. Moreover, an actual bridge (Cao'e River Bridge) was employed to be analyzed, and the prestressed steel strands in the bridge were obtained by the simplified method. A full‐scale test model of the bridge was fabricated to validate the accuracy of the simplified method. Furthermore, based on the simplified method, the effect of the thickness of front wall, the length of inner opening straight section, the thickness of side wall, the thickness of inner wall and the width of inner opening straight section on the internal force in the tie members in the STM was studied. The results show that the length of inner opening straight section has negligible effect on the internal forces in all tie members. Compared with the thickness of the side wall, the thickness of inner wall and the width of inner opening straight section have limited effect on the internal force of tie members. This study was expected to promote the design of cable pylon anchorage zone.

Förderung

  • China Postdoctoral Science Foundation

Zitieren

APA

Li, S., Lim, E., Chen, Z., Hong, Y., & Pu, Q. (2024). Simplified method for predicting the internal forces in strut‐and‐tie model of cable pylon anchorage zone in a cable‐stayed bridge. Structural Concrete, 25(6), 4134-4149. https://doi.org/10.1002/suco.202300926

Vancouver

Li S, Lim E, Chen Z, Hong Y, Pu Q. Simplified method for predicting the internal forces in strut‐and‐tie model of cable pylon anchorage zone in a cable‐stayed bridge. Structural Concrete. 2024;25(6):4134-4149. doi:10.1002/suco.202300926

BibTeX
@article{Li2024,
  author = {Li, Shengyu and Lim, Erwin and Chen, Zhengqing and Hong, Yu and Pu, Qianhui},
  title = {Simplified method for predicting the internal forces in strut‐and‐tie model of cable pylon anchorage zone in a cable‐stayed bridge},
  journal = {Structural Concrete},
  year = {2024},
  volume = {25},
  number = {6},
  pages = {4134--4149},
  doi = {10.1002/suco.202300926}
}
Kostenlos starten →