Assessment of mechanical properties of fiber reinforced cementitious system exposed to high temperature
Structural Concrete · 2023-08 · 24 (4) · 4733-4750
DOI: 10.1002/suco.202200961 ↗Kurz gefasst
Fachartikel in der Zeitschrift Structural Concrete, online erschienen am 15.06.2023. Verfasst von Öznur Biricik und 3 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.
Abstract (Originalsprache)
In this study, it was aimed to determine the optimum fiber type and usage ratio by examining the effect of fiber type and usage rate on the properties of mortar mixtures exposed to high temperatures such as 300°C, 450°C, and 600°C. For this purpose, mixtures were prepared by substituting polypropylene (PP), polyamide (PA) and basalt (B) fibers in proportions as 0.25%, 0.50%, 0.75%, and 1% instead of aggregate. Unit weight, compressive‐flexural strength, ultrasonic pulse velocity (UPV), and permeability properties of mixtures were determined. Regardless of fiber type, flexural strength and permeability increased, UPV decreased with the addition of fiber. Basalt fiber mixtures exhibited the highest performance in terms of flexural strength. PP fiber mixtures exhibited the best performance in terms of permeability, ultrasonic pulse velocity and dynamic modulus of elasticity. SEM analyzes showed that PP fibers exposed to 600°C melted, leading to the formation of channel voids. According to TGA result, approximately 15% mass loss was observed in the control sample at 600°C.
Förderung
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
Zitieren
APA
Biricik, Ö., Bayqra, S. H., Kaya, Y., & Mardani, A. (2023). Assessment of mechanical properties of fiber reinforced cementitious system exposed to high temperature. Structural Concrete, 24(4), 4733-4750. https://doi.org/10.1002/suco.202200961
Vancouver
Biricik Ö, Bayqra SH, Kaya Y, Mardani A. Assessment of mechanical properties of fiber reinforced cementitious system exposed to high temperature. Structural Concrete. 2023;24(4):4733-4750. doi:10.1002/suco.202200961
BibTeX
@article{Biricik2023,
author = {Biricik, Öznur and Bayqra, Sultan Husein and Kaya, Yahya and Mardani, Ali},
title = {Assessment of mechanical properties of fiber reinforced cementitious system exposed to high temperature},
journal = {Structural Concrete},
year = {2023},
volume = {24},
number = {4},
pages = {4733--4750},
doi = {10.1002/suco.202200961}
}
EUVIMED