EUVIMEDEUVIMED entdecken
Crossref

Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement

Oguzhan Yavuz Bayraktar, Gokhan Yarar, Ahmet Benli, Gokhan Kaplan, Osman Gencel, Mucahit Sutcu, Marcin Kozłowski, Marta Kadela

Structural Concrete · 2023-02 · 24 (1) · 1152-1178

DOI: 10.1002/suco.202200142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Structural Concrete, online erschienen am 14.06.2022. Verfasst von Oguzhan Yavuz Bayraktar und 7 weiteren Autor:innen. Die Arbeit wurde bisher 91-mal zitiert (Crossref) und nennt 90 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a typical cellular lightweight material, foam concrete is produced by mixing cement, water, aggregate and a suitable foaming agent and has a density usually below 1600 kg/m 3 . The large number of air spaces present in foam concrete ensures that the concrete has advantages such as lightweight, high fluidity during pouring, excellent thermal and sound insulation, superior fire resistance, and outstanding energy absorption capacity. Its high porosity and the connectivity of the pores, which can allow the entry of negative substances into the concrete environment, cause foam concrete to have a very low physico‐mechanical and durability performance. To eliminate or reduce these disadvantages, this study adopted the use of basalt fibers (BF) as eco‐friendly fiber type and calcium aluminate cement (CAC) as aluminous cement with waste marble powder (WMP) as aggregates in foam concrete. In that respect, 9 mixes with varying content of foaming agent (FC) and basalt fiber have been prepared. Assessment of mechanical performance was based on compressive and flexural strength after 6 h, 1, 7, and 28 days. Dry bulk density, thermal conductivity, porosity, water absorption, and sorptivity of the concretes were determined. Durability characteristics of the concretes were examined by dry shrinkage, high temperature, magnesium sulfate, sulfuric, and hydrochloric acids. The obtained results showed that the content of BF affected the compressive strength of the mixtures slightly negatively or positively depending on the FC. The lowest value in thermal conductivity was gained as 0.645 (W/m K) for the mixture incorporating 1% BF and 50 kg/m 3 foam quantity. In addition, the foam concrete incorporating foam of 30 kg/m 3 and 1% BF showed the best resistance against MgSO 4 . The mixture with 2% BF and 30 kg/m 3 FC exhibited the lowest mass loss after HCI exposure.

Zitieren

APA

Bayraktar, O. Y., Yarar, G., Benli, A., Kaplan, G., Gencel, O., Sutcu, M., Kozłowski, M., & Kadela, M. (2023). Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement. Structural Concrete, 24(1), 1152-1178. https://doi.org/10.1002/suco.202200142

Vancouver

Bayraktar OY, Yarar G, Benli A, Kaplan G, Gencel O, Sutcu M, et al. Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement. Structural Concrete. 2023;24(1):1152-1178. doi:10.1002/suco.202200142

BibTeX
@article{Bayraktar2023,
  author = {Bayraktar, Oguzhan Yavuz and Yarar, Gokhan and Benli, Ahmet and Kaplan, Gokhan and Gencel, Osman and Sutcu, Mucahit and Kozłowski, Marcin and Kadela, Marta},
  title = {Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement},
  journal = {Structural Concrete},
  year = {2023},
  volume = {24},
  number = {1},
  pages = {1152--1178},
  doi = {10.1002/suco.202200142}
}
Kostenlos starten →