EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pyrolytic Carbon Microlattices from 3D‐Printed Polyethylene Glycol Diacrylate and their In Vitro Assessment for Bone Regeneration

Monsur Islam, Jesús Ordoño, Wei Tang, Miguel Monclús, Mónica Echeverry‐Rendón, De‐Yi Wang

Small Structures · 2025-10 · 6 (10)

DOI: 10.1002/sstr.202500290 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Structures, online erschienen am 13.07.2025. Verfasst von Monsur Islam und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Marie Skłodowska-Curie Actions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the potential of 3D pyrolytic carbon (PyC) scaffolds, derived from 3D‐printed polyethylene glycol diacrylate (PEGDA) lattices, for bone tissue engineering. The pyrolytic conversion of PEGDA is systematically studied, which shows that the pyrolysis temperature significantly influences the structural and material properties of the resulting PyC materials. The scaffolds exhibit tunable electrical conductivity and mechanical strength, with the conductivity increasing by seven orders of magnitude as the pyrolysis temperature rises from 500 to 900 °C. Similarly, mechanical properties improve with temperature, reaching a maximum elastic modulus of 36.87 ± 2.95 GPa and hardness of 5.4 ± 0.42 GPa at 900 °C. The 3D PyC microlattices support MC3T3‐E1 preosteoblast proliferation and promote osteogenic differentiation, as evidenced by the expression of key markers (ALP, Runx2, OCN, and Col1A1). Among the scaffolds, PyC obtained at 500 °C shows the highest metabolic activity attributed to their oxygen‐rich surface chemistry, while those treated at 900 °C induce the most robust differentiation, driven by enhanced stiffness and mechanotransductive signaling. These findings position 3D‐printed PyC scaffolds as promising, tunable platforms for bone tissue regeneration, combining structural integrity with cell‐instructive properties.

Förderung

  • H2020 Marie Skłodowska-Curie Actions

Zitieren

APA

Islam, M., Ordoño, J., Tang, W., Monclús, M., Echeverry‐Rendón, M., & Wang, D. (2025). Pyrolytic Carbon Microlattices from 3D‐Printed Polyethylene Glycol Diacrylate and their In Vitro Assessment for Bone Regeneration. Small Structures, 6(10). https://doi.org/10.1002/sstr.202500290

Vancouver

Islam M, Ordoño J, Tang W, Monclús M, Echeverry‐Rendón M, Wang D. Pyrolytic Carbon Microlattices from 3D‐Printed Polyethylene Glycol Diacrylate and their In Vitro Assessment for Bone Regeneration. Small Structures. 2025;6(10). doi:10.1002/sstr.202500290

BibTeX
@article{Islam2025,
  author = {Islam, Monsur and Ordoño, Jesús and Tang, Wei and Monclús, Miguel and Echeverry‐Rendón, Mónica and Wang, De‐Yi},
  title = {Pyrolytic Carbon Microlattices from 3D‐Printed Polyethylene Glycol Diacrylate and their In Vitro Assessment for Bone Regeneration},
  journal = {Small Structures},
  year = {2025},
  volume = {6},
  number = {10},
  doi = {10.1002/sstr.202500290}
}
Kostenlos starten →