Effect of Quenching Temperature on the Microstructure and Mechanical Properties of 37CrMnMo Steel
steel research international · 04.08.2026
DOI: 10.1002/srin.70634 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 04.08.2026. Verfasst von Jianjun Wang und 13 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: National Key Research and Development Program of China, China National Petroleum Corporation, National Natural Science Foundation of China.
Abstract (Originalsprache)
In this study, the influence of quenching temperature on the microstructure and mechanical properties of 37CrMnMo medium‐carbon steel, which consists of tempered martensite, bainite, and carbides, was investigated using a simplified heat treatment process designed for industrial feasibility. Increasing the quenching temperature from 850 to 910 °C enlarged the prior austenite grain size, reducing the resistance to martensitic transformation and raising the martensite volume fraction from 41.3% to 51.1%, while also refining carbides from elongated to short rod‐shaped and decreasing their length from 982 to 173 nm. These changes, together with higher dislocation density, drove the yield strength to a peak of 840 MPa at 880 °C, and 831 MPa at 910 °C because of martensite lath coarsening from 194 to 222 nm at 910 °C. The higher quenching temperature also increased the high‐angle grain boundary density and refined carbides, suppressing crack initiation and propagation, thereby raising the impact energy at −20 °C from 55 to 117 J. Through this simplified heat treatment process, a favorable balance of strength and toughness was achieved via synergistic control of phase fraction, carbide morphology, dislocation density, and grain boundary characteristics.
Förderung
- National Key Research and Development Program of China
- China National Petroleum Corporation
- National Natural Science Foundation of China
Zitieren
APA
Wang, J., Chen, S., Wei, H., Cao, J., Gao, J., Han, L., Guo, B., Zhao, H., Wu, H., Zhang, C., Huang, Y., Lu, J., Wang, S., & Mao, X. (2026). Effect of Quenching Temperature on the Microstructure and Mechanical Properties of 37CrMnMo Steel. steel research international. https://doi.org/10.1002/srin.70634
Vancouver
Wang J, Chen S, Wei H, Cao J, Gao J, Han L, et al. Effect of Quenching Temperature on the Microstructure and Mechanical Properties of 37CrMnMo Steel. steel research international. 2026. doi:10.1002/srin.70634
BibTeX
@article{Wang2026,
author = {Wang, Jianjun and Chen, Siying and Wei, Hao and Cao, Jing and Gao, Junheng and Han, Lihong and Guo, Benxiao and Zhao, Haitao and Wu, Honghui and Zhang, Chaolei and Huang, Yuhe and Lu, Jun and Wang, Shuize and Mao, Xinping},
title = {Effect of Quenching Temperature on the Microstructure and Mechanical Properties of 37CrMnMo Steel},
journal = {steel research international},
year = {2026},
doi = {10.1002/srin.70634}
}
EUVIMED