EUVIMEDEUVIMED entdecken
Crossref

Experimental and Numerical Study on Incremental Forming of Thin‐Walled Metal Part

Zhiqiang Sun, Yue Lu, Chenghua Chen, Pengfei Xie, Ruiming Huang, Zhong Li, Hongsheng Tian

steel research international · 28.03.2026

DOI: 10.1002/srin.202501296 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 28.03.2026. Verfasst von Zhiqiang Sun und 6 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a systematic investigation of single point incremental forming (SPIF) for the prototyping and trial production of a new energy vehicle wiring harness rubber sleeve mounting seat. The maximum forming angle of DC03 steel plate was determined through forming limit angle experiments. Process parameter optimization experiments studied the effects of feed speed, layer feed rate, and tool head diameter on forming quality. Results show that a reasonable parameter combination improves forming accuracy, wall thickness uniformity, and surface quality. Finite element simulation verifies the experimental conclusions, with predicted wall thickness distribution highly consistent with experimental data. Equivalent plastic strain analysis indicates relatively uniform distribution in the main deformation region, but the value at the maximum forming angle exceeds the material's safety critical value, suggesting fracture risk. Actual processing trials confirm the numerical model's accuracy. To mitigate sidewall cracking, a smaller tool head diameter and reduced layer feed were adopted. Surface indentation was significantly reduced by optimizing feed motion. The trajectory with spiral and smooth feed mode proves most effective in suppressing surface defects.

Zitieren

APA

Sun, Z., Lu, Y., Chen, C., Xie, P., Huang, R., Li, Z., & Tian, H. (2026). Experimental and Numerical Study on Incremental Forming of Thin‐Walled Metal Part. steel research international. https://doi.org/10.1002/srin.202501296

Vancouver

Sun Z, Lu Y, Chen C, Xie P, Huang R, Li Z, et al. Experimental and Numerical Study on Incremental Forming of Thin‐Walled Metal Part. steel research international. 2026. doi:10.1002/srin.202501296

BibTeX
@article{Sun2026,
  author = {Sun, Zhiqiang and Lu, Yue and Chen, Chenghua and Xie, Pengfei and Huang, Ruiming and Li, Zhong and Tian, Hongsheng},
  title = {Experimental and Numerical Study on Incremental Forming of Thin‐Walled Metal Part},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.202501296}
}
Kostenlos starten →