Microstructural Evolution, Mechanical and Electrochemical Performance of Duplex Stainless Steel Fabricated by Wire Arc Additive Manufacturing with ER2209 Filler Wire
steel research international · 2024-12 · 95 (12)
DOI: 10.1002/srin.202400425 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 23.08.2024. Verfasst von Sanjeevi Prakash Karunanithi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 48 Literaturangaben.
Abstract (Originalsprache)
This study examines the dependent relationship between microstructure, mechanical properties, and corrosion performance on the wire arc additive manufactured (WAAM) ER2209 duplex stainless steel (DSS). DSS is renowned for its corrosion resistance and mechanical strength, making it favorable for various applications. This study uses the gas metal arc welding (GMAW)‐ based WAAM technique to fabricate the wall structure using ER2209 DSS filler wire. Fine, equiaxed dendrites are formed along the build direction, with the austenite phase exceeding 70% due to the repeated heating and slow cooling inherent to WAAM process. X‐ray diffraction (XRD) confirms no brittle intermetallic phases. The results shows that varying austenite‐ferrite fractions significantly influences the anisotropy in mechanical properties between build and deposit directions. Along the build direction, the varying phase fraction causes difference in hardness of 19.59 HV 0.3 and tensile strength of 20 MPa. The maximum tensile strength (787.08 MPa) is observed in the deposit direction, with a 52 MPa difference between the build and deposit directions. Tafel and EIS measurements indicated that WAAM samples corrosion resistance was almost close to wrought 2205 DSS. This study highlights WAAM's potential for defect‐free DSS parts and suggests post‐heat treatment to optimize microstructure and mechanical properties.
Zitieren
APA
Karunanithi, S. P., Arasappan, R. K., & Nallathambi, S. S. (2024). Microstructural Evolution, Mechanical and Electrochemical Performance of Duplex Stainless Steel Fabricated by Wire Arc Additive Manufacturing with ER2209 Filler Wire. steel research international, 95(12). https://doi.org/10.1002/srin.202400425
Vancouver
Karunanithi SP, Arasappan RK, Nallathambi SS. Microstructural Evolution, Mechanical and Electrochemical Performance of Duplex Stainless Steel Fabricated by Wire Arc Additive Manufacturing with ER2209 Filler Wire. steel research international. 2024;95(12). doi:10.1002/srin.202400425
BibTeX
@article{Karunanithi2024,
author = {Karunanithi, Sanjeevi Prakash and Arasappan, Rajesh Kannan and Nallathambi, Siva Shanmugam},
title = {Microstructural Evolution, Mechanical and Electrochemical Performance of Duplex Stainless Steel Fabricated by Wire Arc Additive Manufacturing with ER2209 Filler Wire},
journal = {steel research international},
year = {2024},
volume = {95},
number = {12},
doi = {10.1002/srin.202400425}
}
EUVIMED