Solidification of Tungsten Inert Gas–Welded Austenitic Stainless Steel with 0.17 wt% N
steel research international · 2025-05 · 96 (5)
DOI: 10.1002/srin.202400244 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 25.06.2024. Verfasst von Caroline Quitzke und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
In this study, an austenitic CrMnNi–N steel is examined with regard to its solidification behavior of the weld metal. For this purpose, the cooling rate of the weld metal at different welding speeds is determined for tungsten inert gas welding without filler metal. The relationship between secondary dendrite arm spacing () and cooling rate () can be described using . Moreover, the microstructure is characterized by a scanning electron microscope using energy‐dispersive X‐ray spectroscopy (EDS). Based on the EDS measurement, it is possible to describe the microsegregation of Cr, Ni, Mn, Mo, and N. The detected microsegregation behavior is compared with the results obtained from Thermo‐Calc calculations. The microsegregation varies depending on the present phase during solidification and correlate well with microstructure observations. By using the software Thermo‐Calc, the theoretical description of solidification is based on the classical Scheil model with fast diffusion of N. A primary ferritic solidification is calculated, which correlates with the experimental findings.
Förderung
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Quitzke, C., Hauser, M., Krüger, L., Volkova, O., & Wendler, M. (2025). Solidification of Tungsten Inert Gas–Welded Austenitic Stainless Steel with 0.17 wt% N. steel research international, 96(5). https://doi.org/10.1002/srin.202400244
Vancouver
Quitzke C, Hauser M, Krüger L, Volkova O, Wendler M. Solidification of Tungsten Inert Gas–Welded Austenitic Stainless Steel with 0.17 wt% N. steel research international. 2025;96(5). doi:10.1002/srin.202400244
BibTeX
@article{Quitzke2025,
author = {Quitzke, Caroline and Hauser, Michael and Krüger, Lutz and Volkova, Olena and Wendler, Marco},
title = {Solidification of Tungsten Inert Gas–Welded Austenitic Stainless Steel with 0.17 wt% N},
journal = {steel research international},
year = {2025},
volume = {96},
number = {5},
doi = {10.1002/srin.202400244}
}
EUVIMED