EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Single‐Step Patterning of Biocompatible Neural Electrodes Using Black‐Pt Functionalized Laser‐Induced Graphene for in Vivo Electrophysiology

Giheon Kim, Yeonghwa Hong, Haeyun Lee, Minseok Kim, Jonghee Eun, Jimin Lee, Seungjun Lee, Namsun Chou, Hyogeun Shin iD

Small Methods · 2025

DOI: 10.1002/smtd.202501384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, 2025. Verfasst von Giheon Kim und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic and Electrical Engineering, College of IT Engineering, Kyungpook National University, Daegu, 41566, Republic of Korea. Hauptthemen laut MEDLINE: Graphite, Platinum, Biocompatible Materials, Lasers. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Neuro-Semi-AI Fusion Superhuman Project, Technology Innovation Program, Ministry of Trade, Industry & Energy (MOTIE, Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Neural electrodes are essential tools for monitoring electrophysiological activity in the brain, driving advances in neuroscience and neurotechnology. However, conventional semiconductor‐based fabrication techniques suffer from high costs, complex procedures, and limited adaptability for customized designs. Here, a single‐step patterning, scalable method is presented for fabricating biocompatible neural electrodes using laser‐induced graphene (LIG) patterned directly onto polyimide substrates. This process requires only a standard CO 2 laser system, a spray‐coated biocompatible lubricant, and black‐Platinum (Pt) functionalization to form conductive traces, electrode sites, and connector pads—eliminating the need for cleanroom infrastructure or photolithography. Selective laser ablation enables precise electrode exposure, allowing rapid prototyping across various formats, including electroencephalography (EEG), electrocorticography (ECoG), and penetrating neural probes. The entire fabrication process is completed within 5 h, reducing production time and cost by over two orders of magnitude compared to conventional approaches. Demonstrating mechanical robustness, reliable signal acquisition, and biocompatibility, the fabricated electrodes exhibit high fidelity in recording EEG, ECoG, and spike signals in anesthetized mice. These findings underscore the method's strong potential for rapid prototyping of personalized brain‐computer interfaces, neurological monitoring systems, and scalable preclinical research tools.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GraphitePlatinumBiocompatible MaterialsLasersElectrodes, ImplantedAnimalsMiceElectroencephalographyBrainElectrocorticographyElectrodes

Stichwörter der Autor:innen

flexible neural electrodehigh‐throughput fabricationin vivo electrophysiologylaser‐induced graphene (LIG)neural interface

Substanzen

GraphitePlatinumBiocompatible Materials

Autor:innen und Institutionen

  • School of Electronic and Electrical Engineering, College of IT Engineering, Kyungpook National University, Daegu, 41566, Republic of Korea.
  • School of Electronics Engineering, College of IT Engineering, Kyungpook National University, Daegu, 41566, Republic of Korea.
  • Emotion, Cognition & Behavior Research Group, Korea Brain Research Institute (KBRI), Daegu, 41062, Republic of Korea.
  • Department of Robotics and Mechatronics Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu, 42988, Republic of Korea.

ORCID-Profile: Hyogeun Shin

Förderung

  • Neuro-Semi-AI Fusion Superhuman Project
  • Technology Innovation Program
  • Ministry of Trade, Industry & Energy (MOTIE, Korea)
  • National Research Foundation (NRF)
  • Bio&Medical Technology Development Program
  • National Research Foundation of Korea (NRF)
  • Korean government (MSIT)
  • Innovative Human Resource Development

Zitieren

APA

Kim, G., Hong, Y., Lee, H., Kim, M., Eun, J., Lee, J., Lee, S., Chou, N., & Shin, H. (2025). Single‐Step Patterning of Biocompatible Neural Electrodes Using Black‐Pt Functionalized Laser‐Induced Graphene for in Vivo Electrophysiology. Small Methods. https://doi.org/10.1002/smtd.202501384

Vancouver

Kim G, Hong Y, Lee H, Kim M, Eun J, Lee J, et al. Single‐Step Patterning of Biocompatible Neural Electrodes Using Black‐Pt Functionalized Laser‐Induced Graphene for in Vivo Electrophysiology. Small Methods. 2025. doi:10.1002/smtd.202501384

BibTeX
@article{Kim2025,
  author = {Kim, Giheon and Hong, Yeonghwa and Lee, Haeyun and Kim, Minseok and Eun, Jonghee and Lee, Jimin and Lee, Seungjun and Chou, Namsun and Shin, Hyogeun},
  title = {Single‐Step Patterning of Biocompatible Neural Electrodes Using Black‐Pt Functionalized Laser‐Induced Graphene for in Vivo Electrophysiology},
  journal = {Small Methods},
  year = {2025},
  doi = {10.1002/smtd.202501384}
}
Kostenlos starten →