EUVIMEDEUVIMED entdecken
Crossref

Study on Dry Etching of iCVD‐Grown pV3D3 Dielectric Polymer Film

Jueun Baek, Yukyung Kim, Jeonghoon Oh, Junghyun Park, Kwang Hyeon Baik, Soohwan Jang, Junhwan Choi iD

Small Methods · 2026-01 · 10 (2)

DOI: 10.1002/smtd.202500744 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 23.06.2025. Verfasst von Jueun Baek und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Dankook University, Yongin, 16890, Republic of Korea. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 91 Literaturangaben. Gefördert von: Korean government (MSIT), Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer dielectric materials are promising candidates for next‐generation electronics due to their cost‐effectiveness, molecular‐level structural tunability, and mechanical deformability. Among various fabrication techniques, initiated chemical vapor deposition (iCVD) enables high‐purity polymer dielectric films with robust insulating properties. However, the lack of high‐resolution patterning techniques has hindered their integration into high‐density electronics. Here, the dry etching process of an organosilicon polymer dielectric layer fabricated via iCVD process is systematically investigated by using reactive ion etching (RIE) with CF 4 plasma. Direct mode RIE enabled a higher etch rate owing to the combined physical and chemical etching mechanisms, whereas remote mode RIE provided uniform etching with minimal perturbation on the surface morphology. Furthermore, introducing O 2 gas in CF 4 RIE significantly enhanced the etch rate in both modes, reaching ≈1 000 Å min −1 , despite localized pattern distortions caused by SiO x formation. To validate its applicability, an ultrathin (≈33 nm), RIE‐patterned polymer dielectric layer was implemented in an AlGaN/GaN‐based metal‐insulator‐semiconductor high electron mobility transistor (MISHEMT), where the effective gate modulationwas achieved, along with a decent transconductance (≈1.5 mS) and a high current on/off ratio (>10 8 ). This study establishes a systematic, high‐resolution dry etching method for the vapor‐phase deposited, crosslinked polymer dielectric layer, paving the way toward high‐density electronics.

Schlagwörter

Stichwörter der Autor:innen

dry etchinghigh electron mobility transistors (HEMTs)initiated chemical vapor deposition (iCVD)polymer dielectric filmreactive ion etching (RIE)

Autor:innen und Institutionen

  • Department of Chemical Engineering, Dankook University, Yongin, 16890, Republic of Korea.
  • Department of Foundry Engineering, Dankook University, Yongin, 16890, Republic of Korea.
  • Department of Materials Science and Engineering, Hongik University, Jochiwon, Sejong, 30016, Republic of Korea.

ORCID-Profile: Junhwan Choi

Förderung

  • Korean government (MSIT)
  • Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE)

Zitieren

APA

Baek, J., Kim, Y., Oh, J., Park, J., Baik, K. H., Jang, S., & Choi, J. (2026). Study on Dry Etching of iCVD‐Grown pV3D3 Dielectric Polymer Film. Small Methods, 10(2). https://doi.org/10.1002/smtd.202500744

Vancouver

Baek J, Kim Y, Oh J, Park J, Baik KH, Jang S, et al. Study on Dry Etching of iCVD‐Grown pV3D3 Dielectric Polymer Film. Small Methods. 2026;10(2). doi:10.1002/smtd.202500744

BibTeX
@article{Baek2026,
  author = {Baek, Jueun and Kim, Yukyung and Oh, Jeonghoon and Park, Junghyun and Baik, Kwang Hyeon and Jang, Soohwan and Choi, Junhwan},
  title = {Study on Dry Etching of iCVD‐Grown pV3D3 Dielectric Polymer Film},
  journal = {Small Methods},
  year = {2026},
  volume = {10},
  number = {2},
  doi = {10.1002/smtd.202500744}
}
Kostenlos starten →