EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Imperceptible and Disposable Humidity and Temperature Sensors with Low Environmental Footprint Enabled by Aerosol Jet Printing and Cellulose‐Based Substrates

Emily Bezerra Alexandre iD, Daniel Corzo, Sabine Lengger, Sandro Carrara, Jürgen Kosel

Small Methods · 2026-01 · 10 (2)

DOI: 10.1002/smtd.202500506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 10.04.2025. Verfasst von Emily Bezerra Alexandre und 4 weiteren Autor:innen. Beteiligte Einrichtung: Silicon Austria Labs GmbH, Europastraße 12, Villach, 9524, Austria. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silicon Austria Labs, Republic of Austria, the Styrian Business Promotion Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The continuous growth of the electronics industry requires a reevaluation of traditional materials and manufacturing techniques to address the rising issue of electronic waste (e‐waste). Environmental monitoring devices, which provide valuable insights into factors such as humidity and temperature, currently rely on non‐degradable substrates and toxic metals, significantly contributing to plastic and electronic waste. Furthermore, conventional manufacturing techniques like screen printing, while effective, are limited in their ability to produce miniaturized, high‐resolution features. Here, aerosol jet printing is used to fabricate devices for humidity and temperature monitoring, enabling minimal footprint (99.75% material reduction vs other printing methods), and precise patterning of features as small as 13 µm, even on biodegradable substrates. The resistive sensor is made of biocompatible conducting polymer poly(3,4 ethylenedioxythiophene) doped with polystyrene sulfonate (PEDOT:PSS) on a biodegradable cellulose substrate. It operates efficiently within a 10–80% RH range while maintaining a high optical transmittance of 91% in the visible spectrum. Additionally, by crosslinking PEDOT:PSS with (3 Glycidyloxypropyl)Trimethoxysilane (GOPS), the sensors effectively detects changes within a temperature range of 20–50 °C. This fully printed sensor on biodegradable substrates represents a step toward next‐generation, eco‐friendly, and metal‐free solutions for environmental monitoring while minimizing ecological impact.

Schlagwörter

Stichwörter der Autor:innen

PEDOT:PSS sensorsaerosol jet printingbiodegradable substrateseco‐conscious sensorsprinted electronics

Autor:innen und Institutionen

  • Silicon Austria Labs GmbH, Europastraße 12, Villach, 9524, Austria.
  • École Polytechnique Fédérale de Lausanne, EPFL, Bio/CMOS Interfaces Lab, Neuchâtel, CH-2000, Switzerland.

ORCID-Profile: Emily Bezerra Alexandre

Förderung

  • Silicon Austria Labs
  • Republic of Austria
  • the Styrian Business Promotion Agency
  • federal state of Carinthia
  • Upper Austrian Research
  • Austrian Association for the Electric and Electronics Industry (FEEI)
  • EECONE project
  • National Funding Authorities

Zitieren

APA

Alexandre, E. B., Corzo, D., Lengger, S., Carrara, S., & Kosel, J. (2026). Imperceptible and Disposable Humidity and Temperature Sensors with Low Environmental Footprint Enabled by Aerosol Jet Printing and Cellulose‐Based Substrates. Small Methods, 10(2). https://doi.org/10.1002/smtd.202500506

Vancouver

Alexandre EB, Corzo D, Lengger S, Carrara S, Kosel J. Imperceptible and Disposable Humidity and Temperature Sensors with Low Environmental Footprint Enabled by Aerosol Jet Printing and Cellulose‐Based Substrates. Small Methods. 2026;10(2). doi:10.1002/smtd.202500506

BibTeX
@article{Alexandre2026,
  author = {Alexandre, Emily Bezerra and Corzo, Daniel and Lengger, Sabine and Carrara, Sandro and Kosel, Jürgen},
  title = {Imperceptible and Disposable Humidity and Temperature Sensors with Low Environmental Footprint Enabled by Aerosol Jet Printing and Cellulose‐Based Substrates},
  journal = {Small Methods},
  year = {2026},
  volume = {10},
  number = {2},
  doi = {10.1002/smtd.202500506}
}
Kostenlos starten →