EUVIMEDEUVIMED entdecken
Crossref

Impact Deposition of a Single Droplet of Low‐Melting‐Point Alloy as the Top Electrode for Organic Photovoltaics

Boyang Yu iD, Liangyuqi Kang, Jianning Liu, Huihui Xia, Weiwei Deng iD, Xinyan Zhao iD

Small Methods · 2025-04 · 9 (4)

DOI: 10.1002/smtd.202401235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 03.10.2024. Verfasst von Boyang Yu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanics and Aerospace Engineering, Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing, Southern University of Science an…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing, Basic and Applied Basic Research Foundation of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Top electrodes of organic photovoltaics (OPVs) are usually thermally evaporated in the vacuum, which is non‐continuous and time‐consuming and has been the bottleneck for the OPV fabrication process. Printable top electrodes that are free of vacuum, high temperature, and solvents will make OPVs more attractive. Low‐melting‐point alloys (LMPAs) are promising candidates for printable OPV electrodes thanks to the merits of matching work functions, high electron conductivity, high environment stability, and no need for post‐treatment. Here, LMPA electrodes are directly deposited on OPVs by simply falling a single LMPA droplet onto the substrate. The LMPA droplet spreads to form a thin film with a smooth interface intimately contacting the substrate. The electrode area can be tailored by adjusting the droplet diameter or the Weber number, which is the ratio of inertia to surface tension. The interface morphology is mainly affected by the contact temperature. The degree of oxidation and charges on the droplet can also influence the electrode area and interface morphology. OPVs with droplet‐impacted LMPA electrodes exhibit power conversion efficiencies of up to 16.17%. This work demonstrates the potential of single‐droplet impact deposition as a simple method for printing OPV electrodes for scalable manufacturing.

Schlagwörter

Stichwörter der Autor:innen

low‐melting‐point alloyorganic photovoltaicsprinting technologytop electrodes

Autor:innen und Institutionen

  • Department of Mechanics and Aerospace Engineering, Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing, Southern University of Science and Technology (SUSTech), Shenzhen, 518055, China.
  • Shenzhen Jinxin Technology Co., Ltd, Shenzhen, 518108, China.
  • Academy for Advanced Interdisciplinary Studies, Southern University of Science and Technology (SUSTech), Shenzhen, 518055, China.

ORCID-Profile: Boyang Yu, Weiwei Deng, Xinyan Zhao

Förderung

  • National Natural Science Foundation of China
  • Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing
  • Basic and Applied Basic Research Foundation of Guangdong Province

Zitieren

APA

Yu, B., Kang, L., Liu, J., Xia, H., Deng, W., & Zhao, X. (2025). Impact Deposition of a Single Droplet of Low‐Melting‐Point Alloy as the Top Electrode for Organic Photovoltaics. Small Methods, 9(4). https://doi.org/10.1002/smtd.202401235

Vancouver

Yu B, Kang L, Liu J, Xia H, Deng W, Zhao X. Impact Deposition of a Single Droplet of Low‐Melting‐Point Alloy as the Top Electrode for Organic Photovoltaics. Small Methods. 2025;9(4). doi:10.1002/smtd.202401235

BibTeX
@article{Yu2025,
  author = {Yu, Boyang and Kang, Liangyuqi and Liu, Jianning and Xia, Huihui and Deng, Weiwei and Zhao, Xinyan},
  title = {Impact Deposition of a Single Droplet of Low‐Melting‐Point Alloy as the Top Electrode for Organic Photovoltaics},
  journal = {Small Methods},
  year = {2025},
  volume = {9},
  number = {4},
  doi = {10.1002/smtd.202401235}
}
Kostenlos starten →