EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Plugging Strength and Failure Risk of Low-Melting-Point Alloy in Casing Sealing

Wenchao Tao iD, Gonghui Liu, Chunqing Zha iD, Wei Wang, Wei Liu iD, Jun Li

Materials · 24.03.2026 · 19 (7) · 1279

DOI: 10.3390/ma19071279 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.03.2026. Verfasst von Wenchao Tao und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Energy Engineering, Beijing University of Technology, Beijing 100124, China. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the effects of overlying axial pressure and ambient temperature on the mechanical plugging performance of low-melting-point alloy (LMPA) in casing sealing, simulation experiments were conducted with LMPA as the sealing material to clarify the underlying mechanisms. Based on the maximum shear strength theory of the alloy plug/casing interface, a metal plug forming device and a gas-tightness detection apparatus were designed. Laboratory tests were then carried out to evaluate the ultimate shear strength and gas sealing integrity of the alloy plug, followed by the analysis of forming axial pressure and ambient temperature on mechanical sealing behavior and the exploration of alloy plug failure modes under mechanical plugging conditions. Experimental results show that the ultimate shear strength between the alloy plug and casing decreases with increasing ambient temperature at an average rate of ~0.225 MPa/°C. Applying forming pressure can enhance the integrity of the alloy plug, promote its radial expansion, and thus improve sealing integrity. After sliding shear failure, alloy plugs with an aspect ratio of 2.32 lose gas tightness completely, while those with an aspect ratio ≥ 3.5 retain more than 50% of their original gas sealing capacity after sliding shear displacement. This study provides a theoretical basis and technical reference for the application of LMPA in downhole casing plugging operations.

Schlagwörter

Stichwörter der Autor:innen

casing sealinglow-melting-point alloyoverlying axial pressuresealing integrityultimate shear strength

Autor:innen und Institutionen

  • College of Mechanical and Energy Engineering, Beijing University of Technology, Beijing 100124, China.
  • CNPC Engineering Technology R&D Co., Ltd., Beijing 102206, China.
  • College of Petroleum Engineering, China University of Petroleum Beijing, Beijing 102249, China.

ORCID-Profile: Wenchao Tao, Chunqing Zha, Wei Liu

Förderung

  • Natural Science Foundation of China

Zitieren

APA

Tao, W., Liu, G., Zha, C., Wang, W., Liu, W., & Li, J. (2026). Mechanical Plugging Strength and Failure Risk of Low-Melting-Point Alloy in Casing Sealing. Materials, 19(7), 1279. https://doi.org/10.3390/ma19071279

Vancouver

Tao W, Liu G, Zha C, Wang W, Liu W, Li J. Mechanical Plugging Strength and Failure Risk of Low-Melting-Point Alloy in Casing Sealing. Materials. 2026;19(7):1279. doi:10.3390/ma19071279

BibTeX
@article{Tao2026,
  author = {Tao, Wenchao and Liu, Gonghui and Zha, Chunqing and Wang, Wei and Liu, Wei and Li, Jun},
  title = {Mechanical Plugging Strength and Failure Risk of Low-Melting-Point Alloy in Casing Sealing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1279},
  doi = {10.3390/ma19071279}
}
Kostenlos starten →